|
|
|
Turnigy D3542/6 1000KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1000kv
Max current: 38A
No load current: 2.4A
Max power: 665W
Internal resistance: 0.031 ohm
Weight: 130g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x42m
Prop size: 7.4V/11x7 14.8V/10x5
Max thrust: 1260g
|
|
|
|
|
Designed to be a direct swap out for Park .10 size motors.
This brushless outrunner will provide more power and longer run times with its high efficiency.
A quality motor, built specifically for planes designed to fly with .10 glow engines.
Specification:
Battery: 2 ~ 4 Cell / 7.4V ~ 14.8V
RPM: 1200kv
Max current: 52A
Watts: 375w
No load current: 11.1V / 2.2A
Internal resistance: 0.02 ohm
Weight: 140g
Diameter of shaft: 5mm
Dimensions: 35x51mm
Test Data:
11.1V - 11X5.5 Prop - 5
|
|
|
|
|
Motory NTM Prop Drive jsou kvalitní a trvanlivé motory s oběžným pláštěm, které mají pevné vinutí, kvalitní ložiska, správně rozmístěné a pečlivě vybrané magnety, vyvážený stator a navíc procházejí čtrnáctibodovou kontrolou kvalityv celém procesu výroby - od výběru materiálu až po závěrečné výkonové testy.
Protože návrh a výroba těchto motorů probíhá na jednom místě (od 2D/3D návrhu, přes výběr materiálů, obrábění, vyvažování, finální sestavení a testování), jsme schopni kontrolovat kvalitu všech výrobních kroků tak, aby k zákazníkovi od
|
|
|
|
|
Designed to be a direct swap out for your 15 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 15 size glow engine.
Specification:
Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V
RPM: 810kv
Max current: 42A
No load current: 11V / 1.5A
Internal resistance: 0.03 ohm
Weight: 152g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 73x35mm
Test Data:
1
|
|
|
|
|
Turnigy L3010C-1300kv (420w)
Specification:
Dimension: 37mm x 18mm
Weight: 87g
Kv: 1300rpm/V
Voltage: 11.1v (3s)
Max Power: 420w
Max Current: 40.1A
No load Current: 1.8A
Diameter of shaft: 4mm
Thrust: 1650g
ESC: 50A~60A
|
|
|
|
|
Combined with a 10x6 E-prop this motor can push out over 1000g in thrust on a 3S1P
configuration lipo.Good for bigger foamies or parkflyers where about 150W is required.
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 16A
Peak Current: 19A
Weight: 56g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount,
spare rubbe
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Dimension: 31mm x 23mm (including mount)
Weight: 25g (kv1800) (not including connectors)
Diameter of shaft: 3mm
Lamination thickness: 0.2mm
Specification:
Battery: 3 Cell 3S/11.1V
RPM: 1800kv
Max current: 10~12A
No load current: 7.4V / 0.6A
Current capacity: 16A/20sec
Internal resistance: 0.145ohm
Dimensions: 12x30mm
Pull: 320g ~ 450g
Prop: 6x3 ~ 9x4.7
ESC: 20A
Max Current: 14A
Battery Type: 2~3S Only
Suited for Mini indoor planes.
|
|
|
|
|
All motors are not include female gold connector and heatshrink tube in accessories packing.
iPower 4006Q-14 530KV:Brushless Quadcopter Motor
Supplied with mount and prop adaptor,gold connector soldered,450MM LONG CABLE.
Specification:
Kv: 530rpm/V
Turns: 16T
Resistance: 0.075Rm
Idle Current: 0.8A
Can size: 50mm
Can Length: 10mm
Shaft: 3mm (Includes Prop saver mount for GWS style props)
Sugg
|
|
|
|
|
Turnigy D2836/11 750KV Brushless Outrunner Motor
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 11.1V/9x6
Max thrust: 800g
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 300kv
Max current: 60A
No load current: 11V/1.2A
Current capacity: 60A/15sec
Internal resistance
|
|
|
|
|
Upgrade your 1.40 size glow engine model with the Turnigy RotoMax 1.40 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 20x11" Propeller and a 120Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
Th
|
|
|
|
|
Specification:
Dimension: 27mm x 29mm, 41mm(with shaft)
Weight: 38g (kv3800) (not including connectors)
Diameter of shaft: 2.3mm
Length of front shaft: 13mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: APC4.1x4.1
Thrust: 330g
Power: 260W
For 300~500g Funjet style airplane.
|
|
|
|
|
All motors are not include female gold connector and heatshrink tube in accessories packing.
iPower 4008Q-14 620KV:Brushless Quadcopter Motor
Supplied with mount and prop adaptor,gold connector soldered,450MM LONG CABLE.
Specification:
Kv: 620rpm/V
Turns: 14T
Resistance: 0.129Rm
Idle Current: 0.8A
Can size: 50mm
Can Length: 23mm
Shaft: 3mm (Includes Prop saver mount for GWS style props)
Sugg
|
|
|
|
|
Designed to be a direct swap out for Park .25 size motors.
This brushless outrunner will provide more power and longer run times with its high efficiency.
A quality motor, built specifically for planes designed to fly with .25 glow engines.
Specification:
Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V
RPM: 610kv
Max current: 44A
Watts: 600W
No load current: 11.1V / 1.3A
Internal resistance: 0.05 ohm
Weight: 190g
Diameter of shaft: 5mm
Dimensions: 35x61mm
Test Data:
14.8v - 13X4.7 Prop - 1
|
|
|
|