|
|
|
Turnigy 2730 Brushless Motor 1500kv
Specification:
Dimension: 32mm x 27mm, 43mm(with shaft)
Weight: 26g (kv1500) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 10mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Thrust: 290~410g
Prop: 7x3.5 or smaller
ESC: 10A
Max Current: 4.5~8A
Lipo Cells: 2-3S
|
|
|
|
|
Specification:
Dimension: 23mm x 24mm, 34mm(with shaft)
Weight: 20g (kv2300) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 9.8mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: EP7x3.5
Thrust: 235g
Power: 76W
For 200~300g model airplane (Indoor).
|
|
|
|
|
Suitable for LAMA2 and similar micro helicopters.
Specification:
Weight: 2.6g
Kv: 6100rpm/v
Size: 17 x 13mm
Max current: 2A
Current: 4.2V/0.4A (No load)
Shaft: 1mm
Shaft length: 5mm
Prop: 2510
Test data:
GWS 2510
Voltage: 4.2V
Current: 2.40A
Watts: 10.08W
Thrust: 32g
Efficiency (g/w): 3.17
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
C1818 Micro brushless Outrunner 3500kv (9g)
Specification:
Diameter: 18mm
Length: 19mm
Shaft: 4mm
Weight: 9g (with 10cm wire)
Power: 40W
Turns: 25
Resistance: 493
Idle Current: 0.3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1600kv
Max current: 9A
No load current: 11V/0.5A
Internal resistance: 0.18 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 1500kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11.4g (kv1500) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 8mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
11500KV Brushless Main Motor for M5 Helicopter
Specification:
RPM/V: 11500KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 21mm
Shaft: 1mm
Weight: 4g
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 1800kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv1800) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8.3mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
13000KV Brushless Main Motor for S5 Helicopter
Specification:
RPM/V: 13000KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 18mm
Shaft: 1.5mm
Weight: 4g
|
|
|
|
|
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells.
Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz.
Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
|
|
|
|
|
Suitable for LAMA2 and similar micro helicopters.
Specification:
Weight: 2.6g
Kv: 6100rpm/v
Size: 17 x 13mm
Max current: 2A
Current: 4.2V/0.4A (No load)
Shaft: 1mm
Shaft length: 5mm
Prop: 3020
Test data;
GWS 3020
Voltage: 4.2V
Current: 2.7A
Watts: 12.6W
Thrust: 34g
Efficiency (g/w): 2.7
Note: Please be careful when using this product. Due to its size and delicate nature it is easy to overload this motor while using a GWS3020 prop. Only use single cell Lithium Polymer batter
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 3800kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv2300) (not including connectors)
Diameter of shaft: ÂF2mm
Length of front shaft: ÂF8mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|