|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Specification:
Dimension: 27mm x 29mm, 41mm(with shaft)
Weight: 38g (kv3800) (not including connectors)
Diameter of shaft: 2.3mm
Length of front shaft: 13mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: APC4.1x4.1
Thrust: 330g
Power: 260W
For 300~500g Funjet style airplane.
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|
|
Turnigy L4255-500 Brushless Motor (1100w)
Specification:
Kv: 500 rpm/v
Voltage: 22.2v(6s)
No load Current: 1.9A
Max Current: 49A
Max Power: 1100W
Shaft Size : 8mm
Shaft Length: 35mm
Dimension: 49mm x 43mm
Thrust: 4500g
Weight: 263g
Note: This motor includes an 8mm Prop adapter that bolts directly to the motor.
|
|
|
|
|
If you re serious about your multi-rotor s performance, look no further than this Turnigy mult-rotor motor.Built with high-end 45SH magnets, a high pole count, custom motor mount and extra long wires, this motor is designed purely for multi-rotor applications.
This motor includes a collet style prop adaptor for use with many different style props featuring a 5mm shaft.It also includes a bolt-on
|
|
|
|
|
Is your 600 heli ready for the next level in performance?!
We wont tell you anymore than to ensure you helis bolts are tight and the main gears teeth are meshed correctly, because this motor is a torque monster!
Specification:
Dimension: 58mm x 49mm, 78mm(with shaft)
Weight: 363g
Kv: 880rpm/V
Turns: 8T
Voltage: 4~8S
Max Current: 90A
Diameter of shaft: 6mm
Length of front shaft: 21.5mm
ESC: 100A
|
|
|
|
|
Upgrade your 1.60 size glow engine model with the Turnigy RotoMax 1.60 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 21x13" Propeller and a 120Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
Th
|
|
|
|
|
13000KV Brushless Main Motor for S5 Helicopter
Specification:
RPM/V: 13000KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 18mm
Shaft: 1.5mm
Weight: 4g
|
|
|
|
|
Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 22 Poles, custom motor mount and allare precision balanced for smooth running, these motors are engineered specifically for multi-rotor u
|
|
|
|
|
Vzhled může klamat. Tento motor s oběžným pláštěm je cca dvakrát větší než "zvonkový" motor Towerpro a otáčí mnohem větší vrtulí.Tento motor je použitý v některých nových modelech letadel firmy Art-tech, takže je testována jejich výdrž, snadné použití a kvalita.
Při použití vrtule 11x4.7 SF motor DT700 dává tah více než 900 g.
Skvělý pro větší modely vyrobené z pěnových materiálů a pro modely typu park flyer.
Specifikace:
Vyžadované napětí: 11.1V
Doporučená kapacita baterií: více než 1300 mAh
Doporučená vrtule:10x4.7, 11x3.8 nebo 11x4.7
Maximální pr
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design.
We instructed the engineers to source the best quality magnets,
bearings and materials available to them and develop a motor that would not only rival,
but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings,
sint
|
|
|
|
|
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells.
Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz.
Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
|
|
|
|
|
Designed to be a direct swap out for your 32 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 32 size glow engine.
Specification:
Battery: 3~4 Cell /11.1~14.8V
RPM: 770kv
Max current: 42A
No load current: 10V/2.4A
Current capacity: 55A/15sec
Internal resistance: 0.02 ohm
Weight: 212g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 72
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 850kv
Max current: 28A
No load current: 11V/0.9A
Internal resistance: 0.09 ohm
Weight: 80g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 34.7x36.9mm
Required
|
|
|
|