|
|
|
This HC595 device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state. Both the shift register clock (SRCLK)
|
|
|
|
|
Model Number: DHT22
Feature:
Brand New High Quality
4-pin package
ultra-low power
No additional components
excellent long-term stability
All calibration, digital output
completely interchangeable
long distance signal transmission
relative humidity and temperature measurement
Specification:
Type: AM2302
Accuracy resolution: 0.1
Humidity range: 0-100%RH
Temperature range: -40~80
Humidity meas
|
|
|
|
|
This universal sensor adapter can be connected to both digital and analog input modules. Combine it with an Arduino sensor expansion board to create a simple circuit design.
Specification:
Dimensions: 44.5x30x16.5mm
Weight: 8.8g
|
|
|
|
|
Arduino Sensor Shield V4.0 umožňuje "plug and play" propojení různých modulů, jako jsou senzory,serva, relé, tlačítka, potenciometry atd. Každý funkční modul má k dispozici ports VCC, GND, propojený s odpovídajícím IO portem na desce Arduino Sensor Shield,který umožňuje propojení 2.54mm kabelem samice-samice.
Specifikace:
- Plug & play.
- Provozní napětí: 5V stejnosměrných
- Vstupní napětí (doporučené): 7-12V stejnosměrných
- Vstupní napětí (limitní): 6-20V stejnosměrné
- Analogové porty: Pevně spojené s šesti analogovými vstup
|
|
|
|
|
This handy bluetooth module is used to configure your Multiwii flight controller wirelessly from your Android device. You will need to download the Multiwii Configuration Android app to your mobile device to use this module.
MultiWii Configuration App functions:
Read and Write PID
Setting switch adjustment for AUX1 and AUX2
Monitor receiver signal and FC output signal
Monitor all sensors and G
|
|
|
|
|
The Pro Mini is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or breakout board to provide USB power and communication to the board.
The Pro Mini is intended for semi-permanent
|
|
|
|
|
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC ada
|
|
|
|
|
The Arduino Fio is a microcontroller board based on the ATmega328P runs at 3.3V and 8 MHz. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board.
The Arduino Fio is intended for wireless applications. The user can upload ske
|
|
|
|
|
Triple Color LED Matrix! This large matrix has 64 Red, 64 Green, and 64 Blue individual LEDs built into one common Anode housing. Its a monster to control, but just imagine what kind of colors you could produce by mixing! Unit comes with a black finish and opaque LED lenses.
Specification:
Dimensions: 61x61x10mm
Weight: 25.5g
|
|
|
|
|
Deska LCD a klávesnice (s konektory typu samec) pro Arduino sestává z modrého LCD displeje 16x2 a šesti tlačítek - zleva doprava jsou to tlačítka SELECT, LEFT, UP, DOWN, RIGHT a RESET. Deska může být osazena přímo do řídící desky Arduino Duemilanove, bez potřeby pájení. Jako interface do LCD slouží piny 5, 6, 7, 8 a 9.
Vlastnosti:
Dobře čitelný modrý LCD displej 16x2
Nastavitelný kontrast
Modulární konstrukce a snadná rozšiřitelnost
Použité modifikované rozhraní LCD4Bit
Modifikované rozhraní LCD4Bit:
V zájmu zachování budoucí použitelnosti SPI portů, byly dig
|
|
|
|
|
This Variable Sensor is based on an adjustable potentiometer, its designed not only as a variable resistor to control motor speed, it can also measure angle with a simple pendulum wheel installed in its rotation head. This devices rotating angle measurement ranges from 0 to 300 degrees. It can be connected to a sensor shield with a 3-pin sensor wire lead. Its very easy to achieve position-dependent interaction when using this sensor with ATmega controllers.
Specification:
Angle
|
|
|
|
|
The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, offers low power consumption, and the provision of critical data between devices allow for reliable transmission.
Features:
• This Arduino XBee shield allows the Arduino to communicate wirelessly over a modified ZigBee protocol using the popular XBee module.
• It is a fully Assembled shield without the XBee module.
|
|
|
|
|
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC ada
|
|
|
|
|
This is a breakout board for InvenSense ITG-3205, a groundbreaking triple-axis, digital output gyroscope.The ITG-3205 is the world’s first single-chip, digital-output, 3-axis MEMS gyro IC optimized for gaming, 3D mice, and 3D remote control applications. The part features enhanced bias and sensitivity temperature stability, reducing the need for user calibration. Low frequency noise is lower t
|
|
|
|
|
433MHz Superheterodyne 3400 RF Transmitter and Receiver
Transmitter Specification:
Working voltage: 3V~12V
Working current: max≤40mA (12V), min≤9mA(3V)
Resonance mode: sound wave resonance (SAW)
Modulation mode: ASK /OOK
Working frequency: 315MHz-433.92MHz, customized frequency is available.
Transmission power: 25mW (315MHz at 12V)
Frequency error: +150kHz (max)
Velocity: ≤10Kbps
Self-own
|
|
|
|