|
|
|
Trackstar 4370Kv (9.0 Turn) sensorless brushless inrunner to suit 1/10 scale cars.
Specification:
Kv: 4370
Max Voltage: 12v
Max current: 46 amps
Watts: 550
Resistance: 0.0127Ohms
Max RPM: 50000
Length: 50mm
Diameter: 35.8mm
Shaft dia.: 3.175mm
Shaft length: 15mm
Weight: 168g
|
|
|
|
|
Designed to be a direct swap out for your 1.10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 1.10 size glow engine.
Specification:
Battery: 6~9S Cell /29.6~33.3V
RPM: 210kv
Max current: 60A
No load current: 11V/1.1A
Internal resistance: 0.04 ohm
Weight: 475g (
|
|
|
|
|
Turnigy D3536/5 1450KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1450kv
Max current: 45A
No load current: 3.5A
Max power: 655W
Internal resistance: 0.023 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/9x6 14.8V/8x4
Max thrust: 1380g
|
|
|
|
|
Turnigy L2210-1400 Bell Style Motor
Specification:
Kv: 1400 rpm/v
Voltage: 7.4~11.1v (2~3s)
No load Current: 1.1A
Max Current: 24A
Max Power: 210W
Shaft Size: 3mm
Shaft Length: 28mm
Dimension: 28mm x 17mm
Thrust: 880g
Weight: 50g
|
|
|
|
|
Turnigy 2815 EDF Outrunner 4800kv for 55/64mm
Specification:
Kv- 4800
Dimensions: 51 x 28mm
Shaft: 2.3/3.0mm
Voltage: 11.1V
Weight: 73g
No-load current: 3.2A
No-load RPM: 55560
Load current: 39.6A
Load RPM: 42560
Thrust: 750g
Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5
Includes 2 shafts, 2.3 and 3.0mm
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1080kv
Max current: 9A
No load current: 11V/0.2A
Internal resistance: 0.04 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design.
We instructed the engineers to source the best quality magnets,
bearings and materials available to them and develop a motor that would not only rival,
but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings,
sint
|
|
|
|
|
Turnigy L2822-3700 Brushless Heli Motor (420w)
Specification:
RPM/V: 3700 KV
Voltage: 11.1v(3s)
No load Current: 5A
Max Current: 40A
Max Power: 420W
Shaft Size: 3.5mm
Shaft Length: 16mm
Dimension: 35mm x 28mm
Thrust: 560g
Weight: 82g
Note: Includes 12 tooth Pinion
|
|
|
|
|
Turnigy L2206A-1650 Brushless Motor (130w)
Specification:
Dimension: 28mm x 21mm
Weight: 37g (50g with all fittings, connectors & prop driver)
Kv: 1650rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 130w
Max Current: 17.8A
No load Current: 0.9A
Diameter of shaft: 3mm
Thrust: 620g
ESC: 20A
|
|
|
|
|
NTM Prop Drive 2836 Series Replacement Shaft
Specification:
Shaft length: 55mm
Shaft diameter: 4mm
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 420kv
Max current: 55A
No load current: 11V/1.5A
Internal resistance: 0.032 ohm
Weight: 3
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Brushless tail motor for micro heli (suites MCPX, FBL100)
Specification:
RPM/V: 12000KV
Stator Diameter: 11mm
Stator Length: 2.6mm
Voltage: 3~5V
No Load Current: 0.3A
Weight: 3.2g
|
|
|
|
|
Turnigy D2836/8 1100KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 18A
No load current: 1A
Max power: 336W
Internal resistance: 0.107 ohm
Weight: 70g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/11x7 14.85V/7x3
Max thrust: 1130g
|
|
|
|