|
|
|
Designed to be a direct swap out for your 25 size glow engine.
This brushless outrunner will provide more power and with its high efficiency , long run times.
A quality motor, built specifically for planes designed to fly with a 25 size glow engine.
Specification:
Battery: 3~4 Cell /11.1~14.8V
RPM: 710kv
Max current: 44A
Watts: 600w
No load current: 11.1V/1.6A
Internal resistance: 0.045 ohm
Weight: 185g
Diameter of shaft: 5mm
Dimensions: 35x53mm
Test Data:
14.8v - 13X4 Prop -
|
|
|
|
|
Specification:
Dimension: 28mm x 37mm, 55mm(with shaft)
Weight: 80g (kv1000) (not including connectors)
Diameter of shaft: 4mm
Length of front shaft: 14mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance:
Voltage: 3S
Prop: EP10x5
Thrust: 1000g
Power: 300W
For:
800-1000g 3D
1200g+ Trainer
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1320kv
Max current: 28A
No load current: 11V/0.9A
Internal resistance: 0.04 ohm
Weight: 80g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 34.7x36.9mm
Require
|
|
|
|
|
Specification:
RPM/V: 1350Kv
Cell Count: 2s~3s Lipoly
Max.current: 10A
Max Watts: 120w
No Load Current: 0.3A/7.4V
Dimensions: Φ28mm×16mm
Shaft: 3mm
Weight: 26g
Max Thrust: 245g
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 1680kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.32 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 850kv
Max current: 28A
No load current: 11V/0.9A
Internal resistance: 0.09 ohm
Weight: 80g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 34.7x36.9mm
Required
|
|
|
|
|
Specifikace:
Otáčky na Volt: 1550ot/V
Max. příkon: 250W
Max.proud: 25A
Max. napětí:7.4 ~ 11.1V, tj. 2 ~ 3 články LiPo
Proud naprázdno: 1.6A
Vnitřní odpor:0.046Ohm
Hmotnost: 65 g
Hřídel: 3*20 mm se závitem
Průměr motoru: 30mm
Průměr montážního lože: 25mm
Testovací data:
Vrtule: 7x7
Pro napětí 7.4V
Odebíraný proud: 15.5A
Tah: 550g
|
|
|
|
|
Specification:
Dimension: 28mm x 38mm, 53mm(with shaft)
Weight: 70g (kv3700) (not including connectors)
Diameter of shaft: F3.17mm
Length of front shaft: F14mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance:
Voltage: 3-4S
Current : 30A
Prop: **
Power: 700W
For 450 size Helicopter
Included Accessories:
1 x 13t and 1 x 11t pinion
3 x Male and 3 x Female 3.5mm
Shrink Tubing
|
|
|
|
|
Turnigy L5055C-700 Brushless Outrunner 700kv
Specification:
Dimension: 50mm x 55mm
Weight: 296g (with 4m connectors)
Kv: 700rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1600w
Max Current: 60A
Max Efficiency: 80% @ 35A
No load Current: 3.0A
Internal Resistance: 0.18
Diameter of shaft: 6mm
|
|
|
|
|
All motors are not include female gold connector and heatshrink tube in accessories packing.
iPower 4006Q-14 530KV:Brushless Quadcopter Motor
Supplied with mount and prop adaptor,gold connector soldered,450MM LONG CABLE.
Specification:
Kv: 530rpm/V
Turns: 16T
Resistance: 0.075Rm
Idle Current: 0.8A
Can size: 50mm
Can Length: 10mm
Shaft: 3mm (Includes Prop saver mount for GWS style props)
Sugg
|
|
|
|
|
Designed to be a direct swap out for your 1.10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 1.10 size glow engine.
Specification:
Battery: 6~9S Cell /29.6~33.3V
RPM: 210kv
Max current: 60A
No load current: 11V/1.1A
Internal resistance: 0.04 ohm
Weight: 475g (
|
|
|
|
|
Turnigy D3536/5 1450KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1450kv
Max current: 45A
No load current: 3.5A
Max power: 655W
Internal resistance: 0.023 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/9x6 14.8V/8x4
Max thrust: 1380g
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
TP 2415-07T Brushless Heli Motor 3850kv
Upgrade that heli today.
Motor comes with cooling fins as standard.
Specification:
Shaft: 3.175mm
Speed: 3850rpm/v (Kv)
Size: 28x50mm (length includes shaft)
Weight: 65g
Voltage: 2-3S1P
Idle Current: 3.0A
|
|
|
|