|
|
|
C1818 Micro brushless Outrunner 3500kv (9g)
Specification:
Diameter: 18mm
Length: 19mm
Shaft: 4mm
Weight: 9g (with 10cm wire)
Power: 40W
Turns: 25
Resistance: 493
Idle Current: 0.3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly
|
|
|
|
|
11500KV Brushless Main Motor for M5 Helicopter
Specification:
RPM/V: 11500KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 21mm
Shaft: 1mm
Weight: 4g
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2050kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.23 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 1500kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11.4g (kv1500) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 8mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1080kv
Max current: 9A
No load current: 11V/0.2A
Internal resistance: 0.04 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1600kv
Max current: 9A
No load current: 11V/0.5A
Internal resistance: 0.18 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|
|
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells.
Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz.
Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
|
|
|
|
|
Turnigy 2730 Brushless Motor 1500kv
Specification:
Dimension: 32mm x 27mm, 43mm(with shaft)
Weight: 26g (kv1500) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 10mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Thrust: 290~410g
Prop: 7x3.5 or smaller
ESC: 10A
Max Current: 4.5~8A
Lipo Cells: 2-3S
|
|
|
|
|
Dimension: 21.4mm x 17.6mm, 30mm (with shaft)
Weight: 11g (kv2000) (not including connectors)
Diameter of shaft: F1.9mm
Length of front shaft: F8.1mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance:
Voltage: 2S
Max current: 3.2 ~ 4.1A/20S
Prop: 6x3 ~ 7x3.5
Pull: 150 ~ 165g
For 150g indoor flyer.
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 50 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2200kv
Max current: 7A
No load current: 7.4V/0.45A
Current capacity: 8A/15sec
Internal resistance: 0.25 ohm
Weight: 14g (not including connectors)
Diameter of shaft: 2mm
Dimensions:
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
Specification:
Dimension: 23mm x 24mm, 34mm(with shaft)
Weight: 20g (kv2300) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 9.8mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: EP7x3.5
Thrust: 235g
Power: 76W
For 200~300g model airplane (Indoor).
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|