|
|
|
The Turnigy K-Force series are based on an all new powerful microprocessor usually reserved for high speed car ESCs. The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.
Specification:
Output: Continuous 40A, burst 57A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
BEC: Twin voltage selection, 5.25v and 6v.
Control Signal Transmission: Optically coupled system.
Max Speed;
2
|
|
|
|
|
TURNIGY marine ESCs are built with USA IR mosFETs for long run times and less heat.
Boat escs have a different requirement to air or car escs.
Their need for sustained high-amp draw makes plane escs unsuitable and car escs
with large amp spike capability, unnecessary.
Thats why TURNIGY marine escs are designed purely for boats, and coated in anti-static then water resistant laquer to prevent shorting should the esc get wet.
They can handle sustained high amp/volt loads and handle
|
|
|
|
|
Ultra fast microprocessor controlled, extremely low resistance circuit and chip design, and aluminum heatsink for better thermal dissipation are just some of the features in the new TURNIGY Super Brain range of brushless speed controllers.
The Super Brain brushless esc is a high performance ESC capable of standard and competition use.
Full protection, including signal loss, over-temperature.
Programable by USB, PC or your Tx.
Compatible with all radio systems.
Features:
Support
|
|
|
|
|
Plush 60A Brushless Speed Controller
The plush series ESC are a very good quality controller.They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.
This BESC can handle 3A continuous current which is great for larger planes with bigger servos.
Specification:
Cont Current: 60A
Burst Current: 80A
BEC Mode: Switching
BEC: 5V / 3A
Input: 5.6V - 22V
Weight: 60g
Size: 80x31x14mm
Supported motor speed for all TURN
|
|
|
|
|
MultiStar ESCs are are a quality speed controller at a fantastic price! Designed for simple installation and easy setup these ESCs have proven to offer excellent performance when used in Multi-rotor applications. If your starting out in Multi-rotors and need an easy to install solution that is tested and proven to work with Multi-rotor craft then these speed controllers have you covered.
These ES
|
|
|
|
|
MultiStar ESCs are are a quality speed controller at a fantastic price! Designed for simple installation and easy setup these ESCs have proven to offer excellent performance when used in Multi-rotor applications. If your starting out in Multi-rotors and need an easy to install solution that is tested and proven to work with Multi-rotor craft then these speed controllers have you covered.
These ES
|
|
|
|
|
MultiStar ESCs are a quality speed controller at a fantastic price! Designed for simple installation and easy setup these ESCs have proven to offer excellent performance when used in Multi-rotor applications. If your starting out in Multi-rotors and need an easy to install solution that is tested and proven to work with Multi-rotor craft then these speed controllers have you covered.
These ESCs f
|
|
|
|
|
The Turnigy Marine waterproof speed controllers are packed with the latest technology and are up there amongst some of the best on the market today.These speed controllers have reached the ultimate IP67 level of protection (Ingress Protection), this is the standard that electronic devices are tested to.The 6 on the IP rating means it is"Totally protected against dust", the 7 on the IP rating mea
|
|
|
|
|
The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.
Specification:
Output: Continuous 25A, burst 35A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically c
|
|
|
|
|
A quality SMT produced ESC with reliable components.
The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.
Specification:
Output: Continuous 45A, burst 50A up to 10 seconds
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery
BEC: Lin
|
|
|
|
|
Turnigy® TRUST SBEC ESCs have a very flexible and broadly capable MCU, able to run all types of brushless motors.The large heatsink and simple PCB layout make heat dissapation consistant, enabling the ESC to be run at its limit, without failure. The ESC is program-card and transmitter programmable with clear and easy to understand instructions included.
Default factory settings:
Brake: off
Bat
|
|
|
|
|
Turnigy® TRUST SBEC ESCs have a very flexible and broadly capable MCU, able to run all types of brushless motors.
The large heatsink and simple PCB layout make heat dissapation consistant, enabling the ESC to be run at its limit, without failure.
The ESC is program-card and transmitter programmable with clear and easy to understand instructions included.
Default factory settings are:
Brake: off
B
|
|
|
|
|
Ultra fast microprocessor controlled, extremely low resistance circuit and chip design, and aluminum heatsink for better thermal dissipation are just some of the features in the new TURNIGY Super Brain range of brushless speed controllers.
The Super Brain brushless esc is a high performance ESC capable of standard and competition use.
Full protection, including signal loss, over-temperature.
Programable by USB, PC or your Tx.
Compatible with all radio systems.
Features:
Supports
|
|
|
|
|
DP 3A je malá (asi 1 g), střídavý regulátor postavený pouze na jediné buňky aplikace a pro odběr proudu až do maximální výše 4A praskne.
Tento střídavý ESC je pouze k použití pro Lipoly jedné buňce aplikace, kde je potřeba více než 3A konstantní.
Vlastnosti:
Vysoká rychlost MCU. Rychlé řešení pro elegantní rychlejší odezva na plyn a vynikající nízké rychlosti časování.
Ochranu buňky, signál ztratil zabezpečený proti poruchám.
Hladké
|
|
|
|
|
TURNIGY Basic 25A v3.1 Brushless Speed Controller
The Start series ESC are a very good quality controller. It is designed for customers who dont want alot of fuss and bother in setting up a BESC, who dont need a huge swiss army knife range of features but want something reliable and a solid performer.
Our Turnigy speed controllers come with a 14 month warranty. We guarentee these are the best Brushless Speed Controllers you can purchase at this price.
These speed controllers are
|
|
|
|