|
DR Mad Thrust
|
|
NTM Series
|
|
Motor Mounts
|
|
TURNIGY XP
|
|
Boat Motors
|
|
Motor Parts
|
|
KDA Outrunners
|
|
Outrunners by size
|
|
TURNIGY SK
|
|
TURNIGY
|
|
TURNIGY RotoMax
|
|
EDF Motors
|
|
TURNIGY EasyMatch
|
|
Scorpion Motors
|
|
Car Motors
|
|
Heli Motors
|
|
|
|
Turnigy L2210-1400 Bell Style Motor
Specification:
Kv: 1400 rpm/v
Voltage: 7.4~11.1v (2~3s)
No load Current: 1.1A
Max Current: 24A
Max Power: 210W
Shaft Size: 3mm
Shaft Length: 28mm
Dimension: 28mm x 17mm
Thrust: 880g
Weight: 50g
|
|
|
|
|
Turnigy L2210A-1650 Brushless Motor (180w)
Specification:
Dimension: 28mm x 25mm
Weight: 49g (64g with all fittings, connectors & prop driver)
Kv: 1650rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 180w
Max Current: 17.5A
No load Current: 1.3A
Diameter of shaft: 3mm
Thrust: 520g
ESC: 20A
|
|
|
|
|
Designed to be a direct swap out for your 1.10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 1.10 size glow engine.
Specification:
Battery: 6~9S Cell /29.6~33.3V
RPM: 210kv
Max current: 60A
No load current: 11V/1.1A
Internal resistance: 0.04 ohm
Weight: 475g (
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|
|
Designed to be a direct swap out for your 15 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 15 size glow engine.
Specification:
Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V
RPM: 810kv
Max current: 42A
No load current: 11V / 1.5A
Internal resistance: 0.03 ohm
Weight: 152g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 73x35mm
Test Data:
1
|
|
|
|
|
Trackstar 3300Kv (12.0 Turn) sensorless brushless inrunner to suit 1/10 scale cars.
Specification:
Kv: 3300
Max Voltage: 15v
Max current: 35amps
Watts: 550
Resistance: 0.0221Ohms
Max RPM: 50000
Length: 50mm
Diameter: 35.8mm
Shaft dia.: 3.175mm
Shaft length: 15mm
Weight: 168g
|
|
|
|
|
XK4042-2000KV Brushless Inrunner
Specification:
# of poles: 4
Max Amps: 58A
Max Volt: 11.1V
Max Watts: 645W
Rpm/V: 2000kv (21T)
Resistance: 0.0180 ohms
No-load Current: 0.9A(7.4V)
Dimension: 39.8mm x 42.2mm
Mounting hole depth: 4mm
Length of extend Shaft: 15mm
Shaft diameter: 5mm
Weight: 211g
|
|
|
|
|
Specification:
Shaft Size: 3.17mm~14mm / 2.3mm~14mm (two shaft sizes included)
Motor Dimensions: ³28mm~29mm
Weight: 43g
Kv: 3500rpm/V
Battery: 2-3cell Lipo (7.4-11.1v)
Opperating Current: 8-16A
Peak Current: 19A
|
|
|
|
|
Designed to be a direct swap out for your 15 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 15 size glow engine.
Specification:
Battery: 3~4 Cell /11.1~14.8V
RPM: 710kv
Max current: 42A
No load current: 11V/1.5A
Internal resistance: 0.034 ohm
Weight: 170g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 73x35
Test Data:
14.8v - 1
|
|
|
|
|
Turnigy D3530/14 1100KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 22A
No load current: 1.6A
Max power: 315W
Internal resistance: 0.077 ohm
Weight: 73g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x30m
Prop size: 7.4V/12x6 14.8V/8x4
Max thrust: 1100g
|
|
|
|
|
Specification:
Weight: 23g
Kv: 4100rpm/v
Size: 23 x 35mm
Max current: 18A/200w
Current: 10V/2.8A (No load)
Shaft: 2.3mm
Shaft length: 9.5mm
|
|
|
|
|
NTM 28 Motor Mount Spacer/Stand Off 10mm (4pc)
|
|
|
|
|
Trackstar 2400Kv (17.0 Turn) sensorless brushless inrunner to suit 1/10 scale cars.
Specification:
Kv: 2400
Max Voltage: 21v
Max current: 24amps
Watts: 550
Resistance: 0.0442Ohms
Max RPM: 50000
Length: 50mm
Diameter: 35.8mm
Shaft dia.: 3.175mm
Shaft length: 15mm
Weight: 168g
|
|
|
|
|
Specifikace:
Rozměry: 21mm x 28mm
Hmotnost: 55g
Průměr přední hřídele: 3.0mm
Délka přední hřídele: 10.84mm
Zadní hřídel: závit M8
Max.proud: 17A*2 = 34A
Max. příkon: 375W
Otáčky na Volt: 1050ot/V
Doporučený regulátor: 2 x 25 A
|
|
|
|
|
Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 22 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor us
|
|
|
|