Střídavé motory » Outrunners by size
| položek: 232 | Seřadit: Dle názvu A→Z| Od nejlevnějšího| Dle kódu 0→9| Od nejnovějšího |
|
|
Kód zb.: AJ820-z8 Cena: 464.00 ,- CZK |
|
D2826-6 2200kv Outrunner MotorD2826-6 2200kv Outrunner Motor Specification: Rpm/V: 2200kv Shaft: 3.17mm Voltage: 2S~3S (7.4v to 11.1v) Weight: 50g Watts: 342w Max Current: 34A ESC: 40A Suggested Prop: 7x4(2S) ~ 5x5 (3S) Mounting Hole Bolt Circle: 16mm or 19mm |
||
|---|---|---|
|
Kód zb.: HQ182-53 Cena: 497.00 ,- CZK |
|
Turnigy Park450 Brushless Outrunner 1200kvDesigned to be a direct swap out for Park 450 size motors. This brushless outrunner will provide more power and longer run times with its high efficiency. A quality motor, built specifically for planes designed to fly with Park 450 size motors. Specification: Battery: 2~3 Cell /7.4~11.1V RPM: 1200kv Max current: 18A Watts: 175w No load current: 11.1V/1.1A Internal resistance: 0.06 ohm Weight: 66g Diameter of shaft: 4mm Dimensions: 28x37mm Test Data: 7.4v - 10X4.7 Prop - 12A - |
||
|---|---|---|
|
Kód zb.: LU007-69 Cena: 605.00 ,- CZK |
|
NTM Prop Drive Series 28-30A 750kv / 140WMotory řady NTM jsou motory s vnější rotací, které nabízejí robusní výkon. Jsou to motory, které mají pevné vinutí, kvalitní ložiska a magnety, vyvážený stator. Při jejich výrobě je navíc prováděna pečlivá kontrola kvality, sestávajících ze 14 kontrolních bodů, během celého výrobního procesu - od obrábění materiálů až po závěrečný zátěžový test. Protože celý výrobní proces (od počítačového návrhu, přes výběr a obrábění materiálu až po závěrečné sestavení a testování) je soustředěný na jednom místě, je možné zaručit konstantní kv |
||
|---|---|---|
|
Kód zb.: MX392-pn Cena: 1291.00 ,- CZK |
|
Turnigy L5055A-400 Brushless Outrunner 400kvTurnigy L5055A-400 Brushless Outrunner 400kv Specification: Dimension: 50mm x 55mm Weight: 293g (with 4m connectors) Kv: 400rpm/V Voltage: 11.1v~29.6v (3s~8s) Max Power: 1400w Max Current: 55A Max Efficiency: 80% @ 30A No load Current: 1.4A Internal Resistance: 0.30 Diameter of shaft: 6mm |
||
|---|---|---|
|
Kód zb.: WG992-63 Cena: 552.00 ,- CZK |
|
KD KA400H 3500kv brushles Heli MotorSpecification: Shaft Size: 3.17mm~14mm / 2.3mm~14mm (two shaft sizes included) Motor Dimensions: ³28mm~29mm Weight: 43g Kv: 3500rpm/V Battery: 2-3cell Lipo (7.4-11.1v) Opperating Current: 8-16A Peak Current: 19A |
||
|---|---|---|
|
Kód zb.: TN789-yc Cena: 621.00 ,- CZK |
|
Turnigy 450 H2218 Brushless outrunner 2500KVThis motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters. Specification: Model: 2218 Turns: 5 Cells: 2~4S Kv: 2500rpm/V No load Current: 2.5A/10V Max power: 500W Weight: 67g Shaft diameter: 3.17mm Dimensions: 27.2 x 36.5mm Recomended ESC: 2~4S/50A |
||
|---|---|---|
|
Kód zb.: EQ044-jl Cena: 442.00 ,- CZK |
|
Turnigy L3010C-1300kv (420w)Turnigy L3010C-1300kv (420w) Specification: Dimension: 37mm x 18mm Weight: 87g Kv: 1300rpm/V Voltage: 11.1v (3s) Max Power: 420w Max Current: 40.1A No load Current: 1.8A Diameter of shaft: 4mm Thrust: 1650g ESC: 50A~60A |
||
|---|---|---|
|
Kód zb.: RK641-xe Cena: 728.00 ,- CZK |
|
Turnigy 450/500 H2223 Brushless outrunner 2900KVThis motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters. Specification: Model: 2223 Turns: 6 Cells: 2~4S Kv: 2900rpm/V No load Current: 2.7A/10V Max power: 600W Weight: 82g Shaft diameter: 3.17mm Dimensions: 27.2 x 42mm Recomended ESC: 2~4S/50A |
||
|---|---|---|
|
Kód zb.: EO241-zh Cena: 2506.00 ,- CZK |
|
Turnigy T600 Brushless Outrunner for 600 Heli (880kv)Is your 600 heli ready for the next level in performance?! We wont tell you anymore than to ensure you helis bolts are tight and the main gears teeth are meshed correctly, because this motor is a torque monster! Specification: Dimension: 58mm x 49mm, 78mm(with shaft) Weight: 363g Kv: 880rpm/V Turns: 8T Voltage: 4~8S Max Current: 90A Diameter of shaft: 6mm Length of front shaft: 21.5mm ESC: 100A |
||
|---|---|---|
|
Kód zb.: SL544-go Cena: 730.00 ,- CZK |
|
11500KV Brushless Main Motor for M5 Helicopter11500KV Brushless Main Motor for M5 Helicopter Specification: RPM/V: 11500KV Diameter: 14mm Motor Length: 10mm Overall Length: 21mm Shaft: 1mm Weight: 4g |
||
|---|---|---|
|
Kód zb.: YB114-vf Cena: 5432.00 ,- CZK |
|
Turnigy RotoMax 50cc Size Brushless Outrunner MotorUpgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel. When combined with a 10s Lipoly battery, 24x12/26x12" Propeller and a 180Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide. |
||
|---|---|---|
|
Kód zb.: IP985-4u Cena: 1783.00 ,- CZK |
|
NTM Prop Drive 50-50 580KV / 2000WNTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from d |
||
|---|---|---|
|
Kód zb.: FU456-a7 Cena: 271.00 ,- CZK |
|
TowerPro Brushless Outrunner 2410-08T 890kvSpecification: For 2-3 Li-Poly Cells (7.2-12.6V) Recommended props: 9 x 4.7, 10 x 4.7, 11 x 4.7 Slow Flyer 31 mm diameter x 46.5 mm length Maximum current: 12A Weight: 66.7 grams / 2.35 oz (everything shown in picture including gray gear box housing) Comes with stick mount plastic frame Firewall mount capable Comes with two prop nuts and one washer 3mm shaft diameter 10mm x 10mm stick mount Kv: 890 12 Stator Poles, 14 Magnets This is a great slowfly motor. Excellent for GWS gearb |
||
|---|---|---|
|
Kód zb.: AO349-67 Cena: 486.00 ,- CZK |
|
D2830-11 1000kv Brushless MotorD2830-11 1000kv Brushless Motor Specification: Rpm/V: 1000kv Shaft: 3.17mm Voltage: 2S~4S (7.4v to 14.8v) Weight: 52g Watts: 210w Max Current: 21A ESC: 30A Suggested Prop: 8x4 (4S) ~ 10x7 (2S) Mounting Hole Bolt Circle: 16mm or 19mm NOTE: This motor is 1000kv. The factory labelled them 1100kv in error. |
||
|---|---|---|
|
Kód zb.: GG714-ne Cena: 527.00 ,- CZK |
|
NTM Prop Drive 13-12 2600KV / 42WNTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from |
||
|---|---|---|
If you have any comments or questions about this site, please direct them to the Webmaster
Datum aktualizace 14.02.2015 ver. 2.00.571 info@modelmania.cz
Vaše IP adresa je: 3.133.108.68
