|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 420kv
Max current: 55A
No load current: 11V/1.5A
Internal resistance: 0.032 ohm
Weight: 3
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 300kv
Max current: 60A
No load current: 11V/1.2A
Current capacity: 60A/15sec
Internal resistance
|
|
|
|
|
Turnigy L5055A-400 Brushless Outrunner 400kv
Specification:
Dimension: 50mm x 55mm
Weight: 293g (with 4m connectors)
Kv: 400rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1400w
Max Current: 55A
Max Efficiency: 80% @ 30A
No load Current: 1.4A
Internal Resistance: 0.30
Diameter of shaft: 6mm
|
|
|
|
|
Upgrade your 1.60 size glow engine model with the Turnigy RotoMax 1.60 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 21x13" Propeller and a 120Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
Th
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 550kv
Max current: 55A
No load current: 11V/1.9A
Internal resistance: 0.021 ohm
Weight: 3
|
|
|
|
|
Střídavý motor s vnější rotací C5065-380 ot/V
Specifikace:
Rozměry: 50x65 mm
Hmotnost: 406 g vč. 4 mm konektorů
Pracovní napětí: 18.5 ~ 22.2 V, tj. 5 ~ 6 článků LiPo
Vnitřní odpor: 0.27 mOhm
Otáčky na Volt: 380ot/V
Max.proud: 80A
Proud naprázdno: 2.0A
Max. příkon: 1665W
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
Designed to be a direct swap out for your 1.10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 1.10 size glow engine.
Specification:
Battery: 8~9S Cell /29.6~33.3V
RPM: 295kv
Max current: 55A
No load current: 10V/1.2A
Current capacity: 65A/15sec
Internal resistan
|
|
|
|
|
Upgrade your 1.20 size glow engine model with the Turnigy RotoMax 1.20 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 8s Lipoly battery, 19x10" or 20x10" Propeller and a 80Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provi
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 500kv
Max current: 65A
No load current: 11V/1.9A
Current capacity: 65A/15sec
Internal resistance
|
|
|
|
|
Motory NTM Prop Drive jsou kvalitní a trvanlivé motory s oběžným pláštěm, které mají pevné vinutí, kvalitní ložiska, správně rozmístěné a pečlivě vybrané magnety, vyvážený stator a navíc procházejí čtrnáctibodovou kontrolou kvalityv celém procesu výroby - od výběru materiálu až po závěrečné výkonové testy.
Protože návrh a výroba těchto motorů probíhá na jednom místě (od 2D/3D návrhu, přes výběr materiálů, obrábění, vyvažování, finální sestavení a testování), jsme schopni kontrolovat kvalitu všech výrobních kroků tak, aby k zákazníkovi od
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from d
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design.
We instructed the engineers to source the best quality magnets, bearings and materials available tothem and develop a motor that would not only rival, but surpass the quality of many leadingmotor manufacturers on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings,
sinte
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 400kv
Max current: 40A
No load current: 10V/2.7A
Current capacity: 60A/15sec
Internal resistan
|
|
|
|