|
Car Motors
|
|
TURNIGY RotoMax
|
|
KDA Outrunners
|
|
Outrunners by size
|
|
DR Mad Thrust
|
|
Motor Mounts
|
|
TURNIGY SK
|
|
TURNIGY
|
|
EDF Motors
|
|
TURNIGY EasyMatch
|
|
NTM Series
|
|
Motor Parts
|
|
Boat Motors
|
|
TURNIGY XP
|
|
Scorpion Motors
|
|
Heli Motors
|
|
|
|
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price.Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines.These parts are then gold anodized to provide a beautiful, long-lasting finish.The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses.The stators are epoxy coated to p
|
|
|
|
|
Designed to be a direct swap out for Park .25 size motors.
This brushless outrunner will provide more power and longer run times with its high efficiency.
A quality motor, built specifically for planes designed to fly with .25 glow engines.
Specification:
Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V
RPM: 610kv
Max current: 44A
Watts: 600W
No load current: 11.1V / 1.3A
Internal resistance: 0.05 ohm
Weight: 190g
Diameter of shaft: 5mm
Dimensions: 35x61mm
Test Data:
14.8v - 13X4.7 Prop - 1
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent wi
|
|
|
|
|
Turnigy XK4074-B-1400KV Brushless Inrunner
Specification:
Max Amps: 80A
Max Volt: 22.2V
Max Watts: 1775W
Rpm/V: 1400kv
Resistance: 0.0147 ohms
No-load Current: 4.2A
Dimension: 40mm x 73.8mm
Mounting hole depth: 5.5mm
Length of extend Shaft: 16mm
Shaft diameter: 5mm
Weight: 385g
|
|
|
|
|
Designed to be a direct swap out for your 25 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 25 size glow engine.
Specification:
Battery: 3 ~ 4 Cell /11.1~14.8V
RPM: 870kv
Max current: 32A
No load current: 10V / 2.4A
Current capacity: 44A / 15sec
Internal resistance: 0.03 ohm
Weight: 193g (not including connectors)
Diameter of shaft: 5mm
Dimensio
|
|
|
|
|
Standard accessory pack for NTM Prop Drive 28 series motors.
CNC Machined (take a close look at the cross mount, even that is machined rather than punched)
from billet 6061 alloy for strength and balance.
The propeller adapter is a press fit to ensure balance.
Specification:
Shaft Diameter: 4mm
Shaft Length: 19mm
Cross Plate Bolt Holes: 34mm
Weight: 13.8g (Total)
Produced in-house by hexTronik to reduce costs and deliver better value to you!
Note: Ensure your propeller is b
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Specification:
Dimension: 23mm x 24mm, 34mm(with shaft)
Weight: 20g (kv2300) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 9.8mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: EP7x3.5
Thrust: 235g
Power: 76W
For 200~300g model airplane (Indoor).
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
D2826-6 2200kv Outrunner Motor
Specification:
Rpm/V: 2200kv
Shaft: 3.17mm
Voltage: 2S~3S (7.4v to 11.1v)
Weight: 50g
Watts: 342w
Max Current: 34A
ESC: 40A
Suggested Prop: 7x4(2S) ~ 5x5 (3S)
Mounting Hole Bolt Circle: 16mm or 19mm
|
|
|
|
|
Designed to be a direct swap out for Park .10 size motors.
This brushless outrunner will provide more power and longer run times with its high efficiency.
A quality motor, built specifically for planes designed to fly with .10 glow engines.
Specification:
Battery: 2 ~ 4 Cell / 7.4V ~ 14.8V
RPM: 1200kv
Max current: 52A
Watts: 375w
No load current: 11.1V / 2.2A
Internal resistance: 0.02 ohm
Weight: 140g
Diameter of shaft: 5mm
Dimensions: 35x51mm
Test Data:
11.1V - 11X5.5 Prop - 5
|
|
|
|
|
Turnigy 600 H37403 Brushless Outrunner 1180kv
A great motor for 550~600 class helicopters such as the Align T-Rex 550 and HK600
Specification:
Model: 3740
Turns:3
Cells: 11s
Kv: 1180rpm/V
No load Current: 3.4A/10v
Max power: 3kw
Weight: 379g
Shaft diameter: 6mm
Dimensions: 44.1 x 65mm
Recomended ESC: 100A HV
|
|
|
|
|
Trackstar 4370Kv (9.0 Turn) sensorless brushless inrunner to suit 1/10 scale cars.
Specification:
Kv: 4370
Max Voltage: 12v
Max current: 46 amps
Watts: 550
Resistance: 0.0127Ohms
Max RPM: 50000
Length: 50mm
Diameter: 35.8mm
Shaft dia.: 3.175mm
Shaft length: 15mm
Weight: 168g
|
|
|
|
|
Specification:
Dimension: 28mm x 38mm, 53mm(with shaft)
Weight: 70g (kv3700) (not including connectors)
Diameter of shaft: F3.17mm
Length of front shaft: F14mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance:
Voltage: 3-4S
Current : 30A
Prop: **
Power: 700W
For 450 size Helicopter
Included Accessories:
1 x 13t and 1 x 11t pinion
3 x Male and 3 x Female 3.5mm
Shrink Tubing
|
|
|
|
|
XK2845-B-2000 ot/V - střídavý motor s vnitřní rotací
Specifikace:
Počet pólů: 4
Max.proud: 25 A
Max. napětí: 11.1 V
Otáček na Volt:2000 ot/V
Vnitřní odpor: 0.0490 Ohm
Odběr naprázdno: 0.8A (při napětí 7.4 V)
Rozměry: 28.0 x 48.0mm
Hloubka montážních otvorů: 5mm
Montážní rozteč otvorů: 19mm x 16mm
Délka hřídele (mimo tělo motoru): 12mm
Průměr hřídele: 4mm
Hmotnost: 120g
|
|
|
|