|
|
|
C1818 Micro brushless Outrunner 3500kv (9g)
Specification:
Diameter: 18mm
Length: 19mm
Shaft: 4mm
Weight: 9g (with 10cm wire)
Power: 40W
Turns: 25
Resistance: 493
Idle Current: 0.3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 500kv
Max current: 65A
No load current: 11V/1.9A
Current capacity: 65A/15sec
Internal resistance
|
|
|
|
|
Turnigy LD3727A-1300 Brushless Motor
Specification:
Dimension: 37mm x 27mm
Weight: 86g Inc 4mm Gold Connector (105g inc all fittings)
Kv: 1300rpm/V
Voltage: 11.1v (3s)
Max Power: 450w
Max Current: 42A
No load Current: 2A
Diameter of shaft: 4mm
Thrust: 1150g
ESC: 60A
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|
|
Specification:
Dimension: 28mm x 38mm, 53mm(with shaft)
Weight: 70g (kv3700) (not including connectors)
Diameter of shaft: F3.17mm
Length of front shaft: F14mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance:
Voltage: 3-4S
Current : 30A
Prop: **
Power: 700W
For 450 size Helicopter
Included Accessories:
1 x 13t and 1 x 11t pinion
3 x Male and 3 x Female 3.5mm
Shrink Tubing
|
|
|
|
|
Specification:
Dimension: 32mm x 26mm, 48mm(with shaft)
Weight: 51g (kv1000) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 15.5mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance:
Voltage: 3S
Max current: 8.5~13A/20S
Prop: 8x3.8~10x4.7
Pull: 440-690g
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 400kv
Max current: 40A
No load current: 10V/2.7A
Current capacity: 60A/15sec
Internal resistan
|
|
|
|
|
Specification:
For 2-3 Li-Poly Cells (7.2-12.6V)
Recommended props: 9 x 4.7, 10 x 4.7, 11 x 4.7 Slow Flyer
31 mm diameter x 46.5 mm length
Maximum current: 12A
Weight: 66.7 grams / 2.35 oz (everything shown in picture including gray gear box housing)
Comes with stick mount plastic frame
Firewall mount capable
Comes with two prop nuts and one washer
3mm shaft diameter
10mm x 10mm stick mount
Kv: 890
12 Stator Poles, 14 Magnets
This is a great slowfly motor. Excellent for GWS gearb
|
|
|
|
|
Dimension: 32mm x 28mm, 48mm (with shaft)
Weight: 54g (kv800) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 15.4mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance
Voltage: 2 - 3S
Max current: 7 ~ 14A/20S
Prop: 8x4 ~ 10x4.7
Thrust: 540 ~ 800g
Power: 160W
For 500~800g model airplane.
|
|
|
|
|
Designed to be a direct swap out for your 15 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 15 size glow engine.
Specification:
Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V
RPM: 810kv
Max current: 42A
No load current: 11V / 1.5A
Internal resistance: 0.03 ohm
Weight: 152g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 73x35mm
Test Data:
1
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 6
Cells: 2~4S
Kv: 2100rpm/V
No load Current: 1.9A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 890kv
Max current: 14A
No load current: 8V/0.7A
Current capacity: 18A/15sec
Internal resistance: 0.20 ohm
Weight: 67g (not including connectors)
Diameter of shaft: 4mm
Dimens
|
|
|
|
|
Turnigy D2836/11 750KV Brushless Outrunner Motor
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 11.1V/9x6
Max thrust: 800g
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2050kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.23 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 550kv
Max current: 55A
No load current: 11V/1.9A
Internal resistance: 0.021 ohm
Weight: 3
|
|
|
|