|
|
|
13000KV Brushless Main Motor for S5 Helicopter
Specification:
RPM/V: 13000KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 18mm
Shaft: 1.5mm
Weight: 4g
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 1500kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11.4g (kv1500) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 8mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 3800kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv2300) (not including connectors)
Diameter of shaft: ÂF2mm
Length of front shaft: ÂF8mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
Suitable for LAMA2 and similar micro helicopters.
Specification:
Weight: 2.6g
Kv: 6100rpm/v
Size: 17 x 13mm
Max current: 2A
Current: 4.2V/0.4A (No load)
Shaft: 1mm
Shaft length: 5mm
Prop: 3020
Test data;
GWS 3020
Voltage: 4.2V
Current: 2.7A
Watts: 12.6W
Thrust: 34g
Efficiency (g/w): 2.7
Note: Please be careful when using this product. Due to its size and delicate nature it is easy to overload this motor while using a GWS3020 prop. Only use single cell Lithium Polymer batter
|
|
|
|
|
Suitable for LAMA2 and similar micro helicopters.
Specification:
Weight: 2.6g
Kv: 6100rpm/v
Size: 17 x 13mm
Max current: 2A
Current: 4.2V/0.4A (No load)
Shaft: 1mm
Shaft length: 5mm
Prop: 2510
Test data:
GWS 2510
Voltage: 4.2V
Current: 2.40A
Watts: 10.08W
Thrust: 32g
Efficiency (g/w): 3.17
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1080kv
Max current: 9A
No load current: 11V/0.2A
Internal resistance: 0.04 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
11500KV Brushless Main Motor for M5 Helicopter
Specification:
RPM/V: 11500KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 21mm
Shaft: 1mm
Weight: 4g
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|
|
Specification:
Dimension: 23mm x 24mm, 34mm(with shaft)
Weight: 20g (kv2300) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 9.8mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: EP7x3.5
Thrust: 235g
Power: 76W
For 200~300g model airplane (Indoor).
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
Specification:
Dimension: 23mm x 18mm, 31mm(with shaft)
Weight: 12g (kv2900) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8mm
Lamination thickness: .2mm
Magnet type: 45SH
Voltage: 7.4V
Amp: 5.8A
Thrust: 165g
Propeller: 6030
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 50 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2200kv
Max current: 7A
No load current: 7.4V/0.45A
Current capacity: 8A/15sec
Internal resistance: 0.25 ohm
Weight: 14g (not including connectors)
Diameter of shaft: 2mm
Dimensions:
|
|
|
|
|
Specification:
RPM/V: 1350Kv
Cell Count: 2s~3s Lipoly
Max.current: 10A
Max Watts: 120w
No Load Current: 0.3A/7.4V
Dimensions: Φ28mm×16mm
Shaft: 3mm
Weight: 26g
Max Thrust: 245g
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|