|
|
|
The Turnigy series are programmable car and boat brushless speed controllers. The Turnigy series boasts features such as large burst currents, programmable breaking and reverse, low resistance, 2-3 Lipo cell capable and low weight.
Specification:
Cont. Current: 18A
Burst Current: 50A
Resistance: 0.001ohm
Car Size: 1/16
Suggested Motor: Around 12T / 2030kv
Battery: 2 Cell Lipo / 4-6 Cell Ni-XX
BEC: 6V/ 1.0A Output
Motor Type: Sensorless Brushless
Size: 31.5*24*15mm
Weight: 19g
A
|
|
|
|
|
Ultra fast microprocessor controlled and extremely low resistance circuit and chip design,water-proof PCB, and aluminum water-cool heatsink for better thermal dissipation are just some of the features in the new TURNIGY Aquastar range of brushless boat speed controllers.
The AquaStar brushless esc is a high performance ESC capable of standard and competition use.
Full protection, include signal loss, temperature, and motor jam protection.
Programable by USB on a PC or by your Tx.
|
|
|
|
|
The Turnigy K-Force series are based on an all new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.
Specification:
Output: Continuous 70A, burst 105A up to 10 seconds.
Input Voltage: 5-12 cells lithium battery or 15-36 cells NIMH battery.
BEC: NIL
Control Signal Transmission: Optically coupled system.
Max Speed;
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm
Size: 70mm (L) *
|
|
|
|
|
Got an old brushed motor laying around and want to put it to good use?
The Turnigy brushed ESC is an excellent speed controller with a linear throttle curve, Lipoly/NiMh ready and programmable braking.
Specification:
Cont Current: 20A
Burst Current: 25A
BEC Mode: 5v/1A
Lipo Cells: 2-3
NiMH : 4-10
Weight: 17g
Size: 45x21x8mm
FOR USE WITH BURSHED MOTORS ONLY.
WILL NOT WORK WITH BRUSHLESS MOTORS
|
|
|
|
|
A quality SMT produced ESC with reliable components.
The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.
Specification:
Output: Continuous 45A, burst 50A up to 10 seconds
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery
BEC: Lin
|
|
|
|
|
Základní 18A v3.1 střídavý regulátor otáček
Základní řada ESC jsou velmi kvalitní regulátor. Je určen pro zákazníky, kteří dont chtějí hodně povyk a obtěžovat při vytváření BESC, kdo dont potřebovat velký švýcarský armádní nůž škálu funkcí, ale chcete něco spolehlivého a jednoduše se používá.
Konstantní proud: 18A
Maximální proud: 22A
BEC mód: Lineární
BEC: 5V / 2A
Lipo články: 2-4
NiMH: 5-12
Hmotnost: 19 g
Velikost: 45x24x
|
|
|
|
|
Turnigy® TRUST SBEC ESCs have a very flexible and broadly capable MCU, able to run all types of brushless motors.The large heatsink and simple PCB layout make heat dissapation consistant, enabling the ESC to be run at its limit, without failure. The ESC is program-card and transmitter programmable with clear and easy to understand instructions included.
Default factory settings:
Brake: off
Bat
|
|
|
|
|
Turnigy 160A 1:8th Scale Sensorless ESC w/Fan
Specification:
Input Voltage: 3~5 Cell Lipoly
Operating Current: 120A (160A Peak)
LVC Cut-off: Autodetect (3.2v/Cell)
Over input voltage protection: Above 5S
Thermal Protection: 95deg C
Lost RX Protection: Yes, Delay 0.5sec
BEC: 6v, 3A
Dimensions: 54.9x47x36mm
Weight: 116g
Programming Options:
Battery Type: Auto, NiCD, NiMH
Operation Mode: Forward/Revers, Forward Only
Initial Brake: 10% ~ 80%
Drake Brake: 0% ~ 30%
Motor Timing: Low,
|
|
|
|
|
Our most powerful ESC now with a more compact design, wider voltage range and lower price! The Turnigy Fatboy V2 speed controller is rated at a massive 300 Amp continuous currentdraw and 380 Amp burst!
The Fatboy V2 features a large aluminum heat sink case, dual 8AWG input wires, 8AWG outputwires for the motor and anti-spark protection.
The optional programming box (sold separately, see related items below) makes setup of theTurnigy Fatboy fast and easy. This ESC is suited t
|
|
|
|
|
TURNIGY Sentilon 100A HV 5-12S Speed Controller (Version 4)
The Sentilon 100A HV can handle 12 lipoly cells in series, thats 36 NiMH cells!
This BESC owes its high voltage ability to the USA imported Fairchild MOSFets used and high quality compnentry.
Now with an ultra-fast 12Mhz CPU. Faster clock cycling preventing sync loss with some large motors*
Warranted for 12 months, the Sentilon series BESCs are guaranteed against faulty manufacturing and poor quality components.
Specif
|
|
|
|
|
The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.
Specification:
Output: Continuous 80A, burst 95A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
BEC: Linear 4A @ 5V
Control Signal Transmission: Optically c
|
|
|
|
|
Ultra fast microprocessor controlled and extremely low resistance circuit and chip design, water-proof PCB, and aluminum water-cooled heatsink for better thermal dissipation are just some of the features in the new TURNIGY Aquastar range of brushless boat speed controllers.
The AquaStar brushless esc is a high performance ESC capable of standard and competition use.
Full protection, include signal loss, temperature, and motor jam protection. Programmable by your Tx.
Compatible t
|
|
|
|
|
Plush 6A Střídavý regulátor otáček
Model Plush: 6A
Nepřetržitý proud: 6A
Burst: 8A
BEC: Lineární
BEC Výstup: 5v/.8A
Lipo Počet: 2cell
NiMH: 5-6
Programability: Programovací karty nebo radiovým ovladačem
Hmotnost: 6 g
Velikost: 24x12x6mm
|
|
|
|
|
Lipoly Single cell voltage booster for Receivers and servos.
This little unit plugs into your single cell lipoly and will boost the voltage to 5V,
allowing you to run a receiver on a single cell lipo!
Why would you want to do this? Less weight of course!
This little voltage booster weighs just 2.9g with wire and plug and full length pins.
It is built on a flexible PCB (the same type used in your m
|
|
|
|
|
Designed and manufactured by HobbyKing, this handy UBEC features a built in safety buzzer to warn you if your input power source drops below 6V.
Specification:
Current: 3A (Max. 4A)
Input voltage: 6V ~ 23V (2S ~ 5S Lipo)
Optional Output: 5.1V or 6.1V
Weight: 13.6g (including wires)
|
|
|
|