|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 5
Cells: 2~3S
Kv: 3500rpm/V
No load Current: 3A/10V
Max power: 600W
Weight: 82g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 42mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|
|
Avroto M2814-11S Short Shaft 770KV Brushless UAV Motor
Specification:
Weight Approx. 100 grams not including wires
35mm D 36mm L
Shaft Diameter 4MM
Prop Diameter 6MM
No-Load Speed 770 rpm per Volt
350 Watts
Current Capacity 22Amps for 60sec
Wire Lenght 600MM
14 Magnets 12 Stator Arms
Hardened Shaft Made in Japan
High Quality EZO Bearings From Japan
Includes:
Radial Mount Set with Prop Adaptor
|
|
|
|
|
Pokud se vážně zajímáte o výkon u vaší quadrikoptéry, nemusíte hledat nic jiného, než motory AX-4006. Tyto motory jsou osazeny velmi kvalitními 45SH magnety, s vysokým počtem polů, mají širokou možnost montáže a navíc-jsou to motory speciálně určené pro vícerotorové modely.
Motory AX-4006 mají na ose nalisované osazení pro vrtule typu GWS a hliníkové montážní lože pro rychlou a snadnou montáž do rámu quadrikoptéry.
Upozornění: Nejedná se o modifikované letecké motory. Jsou to motory navržené a sestrojené speciálně pro quadrikoptéry.
Specifikace:
Otáčky
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 300kv
Max current: 60A
No load current: 11V/1.2A
Current capacity: 60A/15sec
Internal resistance
|
|
|
|
|
Specification:
Dimension: 28mm x 40mm, 56mm(with shaft)
Weight: 79g (kv2350) (not including connectors)
Diameter of shaft: ÂF4.0mm
Length of front shaft: ÂF15mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance;
Voltage: 3-4S Lipoly
Prop: APC4.7x4.25
Thrust: 800g
Power: 480W
|
|
|
|
|
Specification:
Dimension: 27mm x 29mm, 41mm(with shaft)
Weight: 38g (kv3800) (not including connectors)
Diameter of shaft: 2.3mm
Length of front shaft: 13mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: APC4.1x4.1
Thrust: 330g
Power: 260W
For 300~500g Funjet style airplane.
|
|
|
|
|
D2830-11 1000kv Brushless Motor
Specification:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
NOTE: This motor is 1000kv. The factory labelled them 1100kv in error.
|
|
|
|
|
Specification:
Dimension: 32mm x 28mm, 48mm(with shaft)
Weight: 54g (kv1000) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 15.8mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Max current: 12~18A/20S
Prop: 9x6~10x4.7
Thrust: 500~900g
For 500~800g model airplane.
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 1680kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.32 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2050kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.23 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 670kv
Max current: 40A
No load current: 10V/3.9A
Current capacity: 55A/15sec
Internal re
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 5
Cells: 2~4S
Kv: 2500rpm/V
No load Current: 2.5A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|