|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 670kv
Max current: 40A
No load current: 10V/3.9A
Current capacity: 55A/15sec
Internal re
|
|
|
|
|
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 18A
Peak Current: 18A
Suggested prop: 10 x 6.0 E-prop
Suggested Battery: 1700mAh ~ 2200mAh 3S1P
Weight: 71g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors,
prop saver, mount, spare rubber rings, shrink tube and screws.
|
|
|
|
|
Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor us
|
|
|
|
|
Turnigy 600 H37404 Brushless Outrunner 910kv
Specification:
Model: 3740
Turns: 4
Cells: 11s
Kv: 910rpm/V
No load Current: 2.10A/10v
Max power: 3kw
Weight: 390g
Shaft diameter: 6mm
Dimensions: 44.1 x 65mm
Recomended ESC: 100A HV
|
|
|
|
|
Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 24x12/26x12" Propeller and a 180Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
|
|
|
|
|
Turnigy 2610 EDF Outrunner 5000kv for 55/64mm
Specification:
Kv- 5000
Dimensions: 47 x 26mm
Shaft: 2.3/3.0mm
Voltage: 11.1V
Weight: 54g
No-load current: 2.2A
No-load RPM: 58880
Load current: 33.7A
Load RPM: 39680
Thrust: 650g
Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5
Includes 2 shafts, 2.3 & 3.0mm
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|
|
Upgrade your 80cc size gas engine model with the Turnigy RotoMax 80cc Brushless outrunner motor. This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of fuel.
When combined with a 14s Lipoly battery and a 200Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
This motor is specifically suit
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 500kv
Max current: 65A
No load current: 11V/1.9A
Current capacity: 65A/15sec
Internal resistance
|
|
|
|
|
Turnigy D2836/11 750KV Brushless Outrunner Motor
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 11.1V/9x6
Max thrust: 800g
|
|
|
|
|
Combined with a 10x6 E-prop this motor can push out over 1000g in thrust on a 3S1P
configuration lipo.Good for bigger foamies or parkflyers where about 150W is required.
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 16A
Peak Current: 19A
Weight: 56g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount,
spare rubbe
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 550kv
Max current: 55A
No load current: 11V/1.9A
Internal resistance: 0.021 ohm
Weight: 3
|
|
|
|
|
Turnigy 3639 Brushless Motor 750kv
Specification:
Dimension: 37mm x 42mm, 62mm(with shaft)
Weight: 136g (kv750) (not including connectors)
Diameter of shaft: 5mm
Length of front shaft: 18.8mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Max current: 30~35A
Prop: 12x8~14x10
Thrust: 1800~2000g
Power: 600W
For 1500~2000g 3D model airplane.
|
|
|
|
|
Specification:
Dimension: 27mm x 29mm, 41mm(with shaft)
Weight: 38g (kv3800) (not including connectors)
Diameter of shaft: 2.3mm
Length of front shaft: 13mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: APC4.1x4.1
Thrust: 330g
Power: 260W
For 300~500g Funjet style airplane.
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 400kv
Max current: 40A
No load current: 10V/2.7A
Current capacity: 60A/15sec
Internal resistan
|
|
|
|