|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Motory NTM Prop Drive jsou kvalitní a trvanlivé motory s oběžným pláštěm, které mají pevné vinutí, kvalitní ložiska, správně rozmístěné a pečlivě vybrané magnety, vyvážený stator a navíc procházejí čtrnáctibodovou kontrolou kvalityv celém procesu výroby - od výběru materiálu až po závěrečné výkonové testy.
Protože návrh a výroba těchto motorů probíhá na jednom místě (od 2D/3D návrhu, přes výběr materiálů, obrábění, vyvažování, finální sestavení a testování), jsme schopni kontrolovat kvalitu všech výrobních kroků tak, aby k zákazníkovi od
|
|
|
|
|
Upgrade your 1.40 size glow engine model with the Turnigy RotoMax 1.40 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 20x11" Propeller and a 120Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
Th
|
|
|
|
|
Upgrade your 1.20 size glow engine model with the Turnigy RotoMax 1.20 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 8s Lipoly battery, 19x10" or 20x10" Propeller and a 80Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provi
|
|
|
|
|
The Scorpion HK-4020 motors have been developed for the newer 550 class electric helicopters such as Logo 500 with 550mm blade helicopter that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.
Scorpion HK Series Brushless Motors are built from the best materials availa
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Designed to be a direct swap out for your 160 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 160 size glow engine.
Specification:
Battery: 9~10 Cell /33.3~37V
RPM: 290kv
Max current: 78A
No load current: 11V/1.0A
Internal resistance: 0.022 ohm
Weight: 632g
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 670kv
Max current: 40A
No load current: 10V/3.9A
Current capacity: 55A/15sec
Internal re
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 400kv
Max current: 40A
No load current: 10V/2.7A
Current capacity: 60A/15sec
Internal resistan
|
|
|
|
|
Turnigy L5055A-400 Brushless Outrunner 400kv
Specification:
Dimension: 50mm x 55mm
Weight: 293g (with 4m connectors)
Kv: 400rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1400w
Max Current: 55A
Max Efficiency: 80% @ 30A
No load Current: 1.4A
Internal Resistance: 0.30
Diameter of shaft: 6mm
|
|
|
|
|
Upgrade your 80cc size gas engine model with the Turnigy RotoMax 80cc Brushless outrunner motor. This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of fuel.
When combined with a 14s Lipoly battery and a 200Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
This motor is specifically suit
|
|
|
|
|
Turnigy L5055C-700 Brushless Outrunner 700kv
Specification:
Dimension: 50mm x 55mm
Weight: 296g (with 4m connectors)
Kv: 700rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1600w
Max Current: 60A
Max Efficiency: 80% @ 35A
No load Current: 3.0A
Internal Resistance: 0.18
Diameter of shaft: 6mm
|
|
|
|
|
This motor is specifically designed for the 500 helicopter range and a perfect fit for any of our HK500 helicopters.
Specification:
Model: 3126
Turns: 5
Cells: 2~6S
Kv: 1300rpm/V
No load Current: 3A/10V
Max power: 1500W
Weight: 186g
Shaft diameter: 5mm
Dimensions: 37.2 x 47.5mm
Recomended ESC: 2~6S/70A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|