|
|
|
Designed to be a direct swap out for Park 450 size motors.
This brushless outrunner will provide more power and longer run times with its high efficiency.
A quality motor, built specifically for planes designed to fly with Park 450 size motors.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1200kv
Max current: 18A
Watts: 175w
No load current: 11.1V/1.1A
Internal resistance: 0.06 ohm
Weight: 66g
Diameter of shaft: 4mm
Dimensions: 28x37mm
Test Data:
7.4v - 10X4.7 Prop - 12A -
|
|
|
|
|
Turnigy2836 brushless Outrunner 1200kv
Specification:
Dimension: 28mm x 37mm, 55mm(with shaft)
Weight: 74g (kv1200) (not including connectors)
Diameter of shaft: F4.0mm
Length of front shaft: F19mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance:
Voltage: 3-4S Lipoly
Prop: APC9x6
Thrust: 1100g
Power: 340W
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 850kv
Max current: 28A
No load current: 11V/0.9A
Internal resistance: 0.09 ohm
Weight: 80g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 34.7x36.9mm
Required
|
|
|
|
|
D2830-11 1000kv Brushless Motor
Specification:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
NOTE: This motor is 1000kv. The factory labelled them 1100kv in error.
|
|
|
|
|
Turnigy LD2840A-1800kv Brushless Motor (400w)
Specification:
Dimension: 28mm x 40mm
Weight: 79g (93g with all fittings, connectors & prop driver)
Kv: 1800rpm/V
Voltage: 7.4v~14.8v (2s~4s)
Max Power: 400w
Max Current: 30A
No load Current: 1.0A
Diameter of shaft: 4mm
Thrust: 800g
ESC: 40A
|
|
|
|
|
The first of its kind and the start of many to come!
The new P2627 uses die-cast/CNC endbells to reduce cost while staying balanced and low in weight.Produced in India this new range of motors are both economic, strong and perform as expected.
A great small EDF motor with a high Kv. Perfect for parkjet style applications.
Specification:
Kv- 4200
Dimensions: 49 x 26mm
Shaft: 3.0mm
Voltage: 11.1V
|
|
|
|
|
Turnigy L2206A-1650 Brushless Motor (130w)
Specification:
Dimension: 28mm x 21mm
Weight: 37g (50g with all fittings, connectors & prop driver)
Kv: 1650rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 130w
Max Current: 17.8A
No load Current: 0.9A
Diameter of shaft: 3mm
Thrust: 620g
ESC: 20A
|
|
|
|
|
Specification:
Dimension: 28mm x 40mm, 56mm(with shaft)
Weight: 79g (kv2350) (not including connectors)
Diameter of shaft: ÂF4.0mm
Length of front shaft: ÂF15mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance;
Voltage: 3-4S Lipoly
Prop: APC4.7x4.25
Thrust: 800g
Power: 480W
|
|
|
|
|
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price.Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines.These parts are then gold anodized to provide a beautiful, long-lasting finish.The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses.The stators are epoxy coated to p
|
|
|
|
|
Corona CS-239MG Slim-Wing Analog Servo 4.6kg/22g / 0.14sec
Specification:
Model: CS-239MG
Operating Voltage: 4.8V / 6.0V
Operating Current: 300mA / 400mA
Operating Speed: 0.15sec.60º/ 0.14sec.60º
Stall Torque: 4kg.cm /4.6kg.cm
Size: 30 x 10 x 34.5mm
Weight: 22g
Dead Band: ≤5uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 3 slider/Indirect Drive
Gear: Metal
Connector
|
|
|
|
|
Vzhled může klamat. Tento motor s oběžným pláštěm je cca dvakrát větší než "zvonkový" motor Towerpro a otáčí mnohem větší vrtulí.Tento motor je použitý v některých nových modelech letadel firmy Art-tech, takže je testována jejich výdrž, snadné použití a kvalita.
Při použití vrtule 11x4.7 SF motor DT700 dává tah více než 900 g.
Skvělý pro větší modely vyrobené z pěnových materiálů a pro modely typu park flyer.
Specifikace:
Vyžadované napětí: 11.1V
Doporučená kapacita baterií: více než 1300 mAh
Doporučená vrtule:10x4.7, 11x3.8 nebo 11x4.7
Maximální pr
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sint
|
|
|
|
|
TP 2415-07T Brushless Heli Motor 3850kv
Upgrade that heli today.
Motor comes with cooling fins as standard.
Specification:
Shaft: 3.175mm
Speed: 3850rpm/v (Kv)
Size: 28x50mm (length includes shaft)
Weight: 65g
Voltage: 2-3S1P
Idle Current: 3.0A
|
|
|
|
|
Turnigy D2836/8 1100KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 18A
No load current: 1A
Max power: 336W
Internal resistance: 0.107 ohm
Weight: 70g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/11x7 14.85V/7x3
Max thrust: 1130g
|
|
|
|
|
D2826-6 2200kv Outrunner Motor
Specification:
Rpm/V: 2200kv
Shaft: 3.17mm
Voltage: 2S~3S (7.4v to 11.1v)
Weight: 50g
Watts: 342w
Max Current: 34A
ESC: 40A
Suggested Prop: 7x4(2S) ~ 5x5 (3S)
Mounting Hole Bolt Circle: 16mm or 19mm
|
|
|
|