|
KDA Outrunners
|
|
TURNIGY
|
|
Heli Motors
|
|
Scorpion Motors
|
|
TURNIGY RotoMax
|
|
TURNIGY XP
|
|
DR Mad Thrust
|
|
EDF Motors
|
|
TURNIGY EasyMatch
|
|
TURNIGY SK
|
|
Motor Parts
|
|
Boat Motors
|
|
Outrunners by size
|
|
NTM Series
|
|
Car Motors
|
|
Motor Mounts
|
|
|
|
Turnigy D2836/11 750KV Brushless Outrunner Motor
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 11.1V/9x6
Max thrust: 800g
|
|
|
|
|
Turnigy2836 brushless Outrunner 1200kv
Specification:
Dimension: 28mm x 37mm, 55mm(with shaft)
Weight: 74g (kv1200) (not including connectors)
Diameter of shaft: F4.0mm
Length of front shaft: F19mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance:
Voltage: 3-4S Lipoly
Prop: APC9x6
Thrust: 1100g
Power: 340W
|
|
|
|
|
Motory NTM Prop Drive jsou kvalitní a trvanlivé motory s oběžným pláštěm, které mají pevné vinutí, kvalitní ložiska, správně rozmístěné a pečlivě vybrané magnety, vyvážený stator a navíc procházejí čtrnáctibodovou kontrolou kvalityv celém procesu výroby - od výběru materiálu až po závěrečné výkonové testy.
Protože návrh a výroba těchto motorů probíhá na jednom místě (od 2D/3D návrhu, přes výběr materiálů, obrábění, vyvažování, finální sestavení a testování), jsme schopni kontrolovat kvalitu všech výrobních kroků tak, aby k zákazníkovi od
|
|
|
|
|
TP 2415-06T Brushless Heli Motor 4400kv
Upgrade that heli today. Increase torque and speed with this 6T motor.
Motor comes with cooling fins as standard.
Specification:
Shaft: 3.175mm
Speed: 4400rpm/v (Kv)
Size: 28x52mm (length includes shaft)
Weight: 65g
Voltage: 2-3S1P
Idle Current: 4.A
|
|
|
|
|
Turnigy SK3 Competition Series motors are the newest addition to our SK3 motor line-up offering the absolute best quality, performance and efficiency for your model on a competition level. Each and every SK3 Competition Series motor is thoroughly inspected and tested to ensure the high efficiency and top performance required for meeting the demands of competition flying.
Turnigy HeliDrive SK3 Com
|
|
|
|
|
When you need serious power for your large scale perfomance boat or 1/5 scale RC car, look no further than the Turnigy Pro Comp series inrunners. These superbly engineered motors offer high quality, ultra high performance & reliability. The motor is re-buildable and features removable end caps, the motor shaft has a machined flat and is 8mm in diameter to handle the extreme torque produced by this
|
|
|
|
|
NTM 35 Carbon Fibre Motor Mount with screws
|
|
|
|
|
Designed to be a direct swap out for your 10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 10 size glow engine.
Specification:
Battery: 2~3 Cell / 7.4~11.1V
RPM: 1100kv
Max current: 32A
No load current: 10V / 2.10A
Current capacity: 42A / 15sec
Internal resistance: 0.04 ohm
Weight: 149g (not including connectors)
Diameter of shaft: 5mm
Dimensio
|
|
|
|
|
Upgrade your 80cc size gas engine model with the Turnigy RotoMax 80cc Brushless outrunner motor. This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of fuel.
When combined with a 14s Lipoly battery and a 200Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
This motor is specifically suit
|
|
|
|
|
Specification:
Shaft Size: 3.17mm~14mm / 2.3mm~14mm (two shaft sizes included)
Motor Dimensions: ³28mm~29mm
Weight: 43g
Kv: 3500rpm/V
Battery: 2-3cell Lipo (7.4-11.1v)
Opperating Current: 8-16A
Peak Current: 19A
|
|
|
|
|
13000KV Brushless Main Motor for S5 Helicopter
Specification:
RPM/V: 13000KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 18mm
Shaft: 1.5mm
Weight: 4g
|
|
|
|
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 6
Cells: 2~4S
Kv: 2900rpm/V
No load Current: 2.7A/10V
Max power: 600W
Weight: 82g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 42mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
Náhradní motor pro Floater-Jet (AXN-2208-2150)
Specifikace:
Otáček na Volt: 2150 ot/V
Max.příkon: 180W
Max. proud: 20A
Max. napětí: 11.1V (LiPo tříčlánek)
Počet závitů: 16
Vnitřní odpor: 0.085Ohm
Typ magnetů: N45SH
Odběr naprázdno: 1.52A
Průměr hřídele: 3mm
Hmotnost: 44g
Doporučená vrtule: 5x5 / 6x4
|
|
|
|
|
Střídavý motor s vnější rotací C5065-380 ot/V
Specifikace:
Rozměry: 50x65 mm
Hmotnost: 406 g vč. 4 mm konektorů
Pracovní napětí: 18.5 ~ 22.2 V, tj. 5 ~ 6 článků LiPo
Vnitřní odpor: 0.27 mOhm
Otáčky na Volt: 380ot/V
Max.proud: 80A
Proud naprázdno: 2.0A
Max. příkon: 1665W
|
|
|
|