|
|
|
Turnigy L5055C-700 Brushless Outrunner 700kv
Specification:
Dimension: 50mm x 55mm
Weight: 296g (with 4m connectors)
Kv: 700rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1600w
Max Current: 60A
Max Efficiency: 80% @ 35A
No load Current: 3.0A
Internal Resistance: 0.18
Diameter of shaft: 6mm
|
|
|
|
|
Turnigy 2610 EDF Outrunner 5000kv for 55/64mm
Specification:
Kv- 5000
Dimensions: 47 x 26mm
Shaft: 2.3/3.0mm
Voltage: 11.1V
Weight: 54g
No-load current: 2.2A
No-load RPM: 58880
Load current: 33.7A
Load RPM: 39680
Thrust: 650g
Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5
Includes 2 shafts, 2.3 & 3.0mm
|
|
|
|
|
Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 24x12/26x12" Propeller and a 180Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
|
|
|
|
|
Turnigy D3536/9 910KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 910kv
Max current: 25.5A
No load current: 1.5A
Max power: 370W
Internal resistance: 0.063 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/12x5 14.8V/10x7
Max thrust: 1050g
|
|
|
|
|
D2830-11 1000kv Brushless Motor
Specification:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
NOTE: This motor is 1000kv. The factory labelled them 1100kv in error.
|
|
|
|
|
Specification:
Dimension: 26mm x 28mm, 41mm(with shaft)
Weight: 39g (kv4200) (not including connectors)
Diameter of shaft: F2.3mm
Length of front shaft: F12mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance:
Voltage: 2-3S
Max current: 22A/20S
Prop: APC4.1x4.5
Thrust: 360g
Power: 300W
For 300 size helicopter.
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 4
Cells: 2~4S
Kv: 3200rpm/V
No load Current: 3.6A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Turnigy D3548/4 1100KV Brushless Outrunner Motor
Specification:
Battery: 3~5 Cell /11.1~18.5V
RPM: 1100kv
Max current: 50A
No load current: 3.1A
Max power: 910W
Internal resistance: 0.023 ohm
Weight: 159g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x48m
Max thrust: 2150g
|
|
|
|
|
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 18A
Peak Current: 18A
Suggested prop: 10 x 6.0 E-prop
Suggested Battery: 1700mAh ~ 2200mAh 3S1P
Weight: 71g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors,
prop saver, mount, spare rubber rings, shrink tube and screws.
|
|
|
|
|
TURNIGY Heat Sink with Fan for 36 series motors. Or motors with a diameter of 36mm
Specification:
Inner diameter: 35.55mm
Dimentions: 51 x 55 x 63mm (whole unit)
Weight: 75g
|
|
|
|
|
Looking for a 10 channel radio system complete with on board telemetry? The Turnigy TGY-i10 has arrived! The TGY-i10 is bursting with features which are perfect for the modeller who requires maximum control and real time telemetry.
The TGY-i10 uses 2.4GHz AFHDS 2 (automatic frequency hopping digital system 2) which spans the whole frequency band. Equipped with a high sensitivity receiver, this
|
|
|
|
|
Turnigy 2226-3000 EDF Outrunner
Specification:
Suits: 70mm EDF Unit
RPM/v: 3000kv
Max RPM: 44000
No load current: 4A
Max Current: 40amp
Max Watts: 600w
Thrust: 1200gram
Voltage: 14.8v (4s)
Diameter of shaft: 4mm
Bolt Holts: 19mm
Weight: 98g
ESC: 45A
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 5
Cells: 2~4S
Kv: 2500rpm/V
No load Current: 2.5A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 22 Poles, custom motor mount and allare precision balanced for smooth running, these motors are engineered specifically for multi-rotor u
|
|
|
|
|
Turnigy 3025-1500kv 1300w Helicopter Motor
Specification:
RPM/v: 1500kv
Max RPM: 33000
No load current: 3.3A
Max Current: 69amp
Max Watts: 1300w
Thrust: 1256gram
Voltage: 22.2v (6s)
Diameter of shaft: 5mm
Weight: 180g
ESC: 80A
|
|
|
|