Střídavé motory » Outrunners by size » Parkfly
| položek: 66 | Seřadit: Dle názvu A→Z| Od nejlevnějšího| Dle kódu 0→9| Od nejnovějšího |
|
|
Kód zb.: IG785-lz Cena: 616.00 ,- CZK |
|
Turnigy 450 H2218 Brushless outrunner 3200KVThis motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters. Specification: Model: 2218 Turns: 4 Cells: 2~4S Kv: 3200rpm/V No load Current: 3.6A/10V Max power: 500W Weight: 67g Shaft diameter: 3.17mm Dimensions: 27.2 x 36.5mm Recomended ESC: 2~4S/50A |
||
|---|---|---|
|
Kód zb.: LT370-t9 Cena: 996.00 ,- CZK |
|
Turnigy G10 Brushless Outrunner 1100kvDesigned to be a direct swap out for your 10 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 10 size glow engine. Specification: Battery: 2~3 Cell / 7.4~11.1V RPM: 1100kv Max current: 32A No load current: 10V / 2.10A Current capacity: 42A / 15sec Internal resistance: 0.04 ohm Weight: 149g (not including connectors) Diameter of shaft: 5mm Dimensio |
||
|---|---|---|
|
Kód zb.: GU060-cj Cena: 692.00 ,- CZK |
|
NTM Prop Drive 28-36 3000KV / 755WNTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de |
||
|---|---|---|
|
Kód zb.: KL698-1s Cena: 572.00 ,- CZK |
|
Turnigy L2206A-1650 Brushless Motor (130w)Turnigy L2206A-1650 Brushless Motor (130w) Specification: Dimension: 28mm x 21mm Weight: 37g (50g with all fittings, connectors & prop driver) Kv: 1650rpm/V Voltage: 7.2v~11.1v (2s~3s) Max Power: 130w Max Current: 17.8A No load Current: 0.9A Diameter of shaft: 3mm Thrust: 620g ESC: 20A |
||
|---|---|---|
|
Kód zb.: AJ820-z8 Cena: 464.00 ,- CZK |
|
D2826-6 2200kv Outrunner MotorD2826-6 2200kv Outrunner Motor Specification: Rpm/V: 2200kv Shaft: 3.17mm Voltage: 2S~3S (7.4v to 11.1v) Weight: 50g Watts: 342w Max Current: 34A ESC: 40A Suggested Prop: 7x4(2S) ~ 5x5 (3S) Mounting Hole Bolt Circle: 16mm or 19mm |
||
|---|---|---|
|
Kód zb.: AX970-qr Cena: 511.00 ,- CZK |
|
KD KA450H 3200kv brushles Heli MotorSpecification: Shaft Size: 3.17mm~14mm Motor Dimensions: ³28mm~34mm Weight: 61g KV: 3200rpm/V Battery: 2-3cell Lipo (7.4-11.1v) Opperating Current: 8-19A Peak Current: 24A (15sec) |
||
|---|---|---|
|
Kód zb.: HU669-70 Cena: 593.00 ,- CZK |
|
Turnigy 2627 Brushless 300-Size Heli Motor 4200kvSpecification: Dimension: 26mm x 28mm, 41mm(with shaft) Weight: 39g (kv4200) (not including connectors) Diameter of shaft: F2.3mm Length of front shaft: F12mm Lamination thickness: .2mm Magnet type: 45SH Max performance: Voltage: 2-3S Max current: 22A/20S Prop: APC4.1x4.5 Thrust: 360g Power: 300W For 300 size helicopter. |
||
|---|---|---|
|
Kód zb.: NO028-lh Cena: 646.00 ,- CZK |
|
Turnigy Typhoon 450H 2215H Heli Motor 3550kv (450 class)Turnigy Typhoon 2215H Brushless 450-Size Heli Motor 3550kv Specification: Dimension: 35mm x 28mm, 51mm(with shaft) Weight: 63g (kv3550) (not including connectors) Voltage: 2-4S Max current: 20~28A Diameter of shaft: 3.17mm Length of front shaft: 16mm ESC: 40A Turnigy Typhoon 2215H for 450 class Helicopters. |
||
|---|---|---|
|
Kód zb.: RW464-1y Cena: 925.00 ,- CZK |
|
Turnigy Park480 Brushless Outrunner 850kvDesigned to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner. Specification: Battery: 2~3 Cell /7.4~11.1V RPM: 850kv Max current: 28A No load current: 11V/0.9A Internal resistance: 0.09 ohm Weight: 80g (not including connectors) Diameter of shaft: 4mm Dimensions: 34.7x36.9mm Required |
||
|---|---|---|
|
Kód zb.: KX000-cq Cena: 654.00 ,- CZK |
|
Turnigy 2830 Brushless Motor 1000kvSpecification: Dimension: 32mm x 28mm, 48mm(with shaft) Weight: 54g (kv1000) (not including connectors) Diameter of shaft: 3mm Length of front shaft: 15.8mm Lamination thickness: .2mm Magnet type: 45SH Max performance Voltage: 2-3S Max current: 12~18A/20S Prop: 9x6~10x4.7 Thrust: 500~900g For 500~800g model airplane. |
||
|---|---|---|
|
Kód zb.: LC907-d8 Cena: 773.00 ,- CZK |
|
Turnigy 2217 20turn 860kv 22A OutrunnerSpecification: Kv: 860rpm/v Operating Current: 6A ~ 17A Peak Current: 19A Weight: 72g Dimensions: 27.6 x 36mm Shaft Size: 3.175mm Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws. Performance Data: Voltage: 11.1V / 11.1V / 11.1V Current: 12.3A / 16.3A / 17.9A Prop: 1060 / 1070 / 1147 Thrust: 800g / 970g / 1040g |
||
|---|---|---|
|
Kód zb.: CU425-44 Cena: 492.00 ,- CZK |
|
Turnigy 450 H2218 Brushless outrunner 3550KVThis motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters. Specification: Model: 2218 Turns: 3.5 Cells: 2 ~ 3S Kv: 3550rpm / V No load Current: 4.7A / 10V Max power: 500W Weight: 67g Dimensions: 27.2 x 36.5mm Recomended ESC: 2~3S / 30A |
||
|---|---|---|
|
Kód zb.: VG979-4v Cena: 462.00 ,- CZK |
|
Turnigy 2632 Brushless Motor 1000kvSpecification: Dimension: 32mm x 26mm, 48mm(with shaft) Weight: 51g (kv1000) (not including connectors) Diameter of shaft: 3mm Length of front shaft: 15.5mm Lamination thickness: 0.2mm Magnet type: 45SH Max performance: Voltage: 3S Max current: 8.5~13A/20S Prop: 8x3.8~10x4.7 Pull: 440-690g |
||
|---|---|---|
|
Kód zb.: KK365-j0 Cena: 680.00 ,- CZK |
|
NTM Prop Drive Series 28-26A 1200kv / 250w (short shaft version)This is a short shaft version of our popular NTM 28-26A 1200kv brushless outrunner motor. It is built with no external shaft allowing you to easily mount this motor to your multi-rotor frame without the need for any modification. NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are |
||
|---|---|---|
|
Kód zb.: MG023-up Cena: 502.00 ,- CZK |
|
Turnigy Park450 Brushless Outrunner 890kvDesigned to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner. Specification: Battery: 2~3 Cell /7.4~11.1V RPM: 890kv Max current: 14A No load current: 8V/0.7A Current capacity: 18A/15sec Internal resistance: 0.20 ohm Weight: 67g (not including connectors) Diameter of shaft: 4mm Dimens |
||
|---|---|---|
If you have any comments or questions about this site, please direct them to the Webmaster
Datum aktualizace 14.02.2015 ver. 2.00.571 info@modelmania.cz
Vaše IP adresa je: 18.188.87.124
.jpg)
