|
|
|
Specification:
Dimension: 28mm x 40mm, 56mm(with shaft)
Weight: 79g (kv2350) (not including connectors)
Diameter of shaft: ÂF4.0mm
Length of front shaft: ÂF15mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance;
Voltage: 3-4S Lipoly
Prop: APC4.7x4.25
Thrust: 800g
Power: 480W
|
|
|
|
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 6
Cells: 2~4S
Kv: 2900rpm/V
No load Current: 2.7A/10V
Max power: 600W
Weight: 82g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 42mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|
|
Specification:
Dimension: 28mm x 38mm, 53mm(with shaft)
Weight: 72g (kv3200) (not including connectors)
Diameter of shaft: 3.17mm
Length of front shaft: 14mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 3-5S
Prop: 70mm EDF (3~5 Blade)
Power: 650W
For 70 size EDF
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sint
|
|
|
|
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 5
Cells: 2~3S
Kv: 3500rpm/V
No load Current: 3A/10V
Max power: 600W
Weight: 82g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 42mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Designed to be a direct swap out for your 10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 10 size glow engine.
Specification:
Battery: 2~3 Cell / 7.4~11.1V
RPM: 1100kv
Max current: 32A
No load current: 10V / 2.10A
Current capacity: 42A / 15sec
Internal resistance: 0.04 ohm
Weight: 149g (not including connectors)
Diameter of shaft: 5mm
Dimensio
|
|
|
|
|
Turnigy D2836/8 1100KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 18A
No load current: 1A
Max power: 336W
Internal resistance: 0.107 ohm
Weight: 70g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/11x7 14.85V/7x3
Max thrust: 1130g
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 4
Cells: 2~4S
Kv: 3200rpm/V
No load Current: 3.6A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
Designed to be a direct swap out for Park 450 size motors.
This brushless outrunner will provide more power and longer run times with its high efficiency.
A quality motor, built specifically for planes designed to fly with Park 450 size motors.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1200kv
Max current: 18A
Watts: 175w
No load current: 11.1V/1.1A
Internal resistance: 0.06 ohm
Weight: 66g
Diameter of shaft: 4mm
Dimensions: 28x37mm
Test Data:
7.4v - 10X4.7 Prop - 12A -
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|
|
Specification:
Dimension: 26mm x 28mm, 41mm(with shaft)
Weight: 39g (kv4200) (not including connectors)
Diameter of shaft: F2.3mm
Length of front shaft: F12mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance:
Voltage: 2-3S
Max current: 22A/20S
Prop: APC4.1x4.5
Thrust: 360g
Power: 300W
For 300 size helicopter.
|
|
|
|
|
Specification:
Shaft Size: 3.17mm~14mm / 2.3mm~14mm (two shaft sizes included)
Motor Dimensions: ³28mm~29mm
Weight: 43g
Kv: 3500rpm/V
Battery: 2-3cell Lipo (7.4-11.1v)
Opperating Current: 8-16A
Peak Current: 19A
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 6
Cells: 2~4S
Kv: 2100rpm/V
No load Current: 1.9A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|