Střídavé motory » Outrunners by size » .15 - .40
| položek: 53 | Seřadit: Dle názvu A→Z| Od nejlevnějšího| Dle kódu 0→9| Od nejnovějšího |
|
|
Kód zb.: SO204-er Cena: 841.00 ,- CZK |
|
Turnigy G15 Brushless Outrunner 710kvDesigned to be a direct swap out for your 15 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 15 size glow engine. Specification: Battery: 3~4 Cell /11.1~14.8V RPM: 710kv Max current: 42A No load current: 11V/1.5A Internal resistance: 0.034 ohm Weight: 170g (not including connectors) Diameter of shaft: 5mm Dimensions: 73x35 Test Data: 14.8v - 1 |
||
|---|---|---|
|
Kód zb.: DG792-cz Cena: 1013.00 ,- CZK |
|
Turnigy G32 Brushless Outrunner 770kvDesigned to be a direct swap out for your 32 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 32 size glow engine. Specification: Battery: 3~4 Cell /11.1~14.8V RPM: 770kv Max current: 42A No load current: 10V/2.4A Current capacity: 55A/15sec Internal resistance: 0.02 ohm Weight: 212g (not including connectors) Diameter of shaft: 5mm Dimensions: 72 |
||
|---|---|---|
|
Kód zb.: AU240-5z Cena: 421.00 ,- CZK |
|
HobbyKing Donkey ST3508-730kv Brushless MotorKdyž vám jde o sílu a výkon, tak HobbyKing Donkey ST3508 je ten správný motor pro vás.Tento motor nabízí pevné a robusní motorové lože pro montáž, osu o průměru 5 mm a samomazná pouzdra, která si nezadají s ložisky použitými v některých "výstavních" motorech. Specifikace: Otáček na Volt: 730 Rozměry: 41 x 28 mm Hřídel: 5.0mm Napětí: 11.1V ~ 14.8V Hmotnost: 115g Odběr naprázdno: 1.9A při napětí 11.1V Max.odběr: 35A Max. příkon: 330W Rozteč montážních otvorů: 51mm Naměřená data: Vrtule 12x6 při napětí 11.1V odběr 16A, tah 1060g Vrtule 13X4 při napětí 11.1V |
||
|---|---|---|
|
Kód zb.: SF123-01 Cena: 1169.00 ,- CZK |
|
Turnigy Aerodrive SK3 - 3542-1000kv Brushless Outrunner MotorTurnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sint |
||
|---|---|---|
|
Kód zb.: QO977-11 Cena: 633.00 ,- CZK |
|
Turnigy L3015A-1000 Brushless MotorTurnigy L3015A-1000 Brushless Motor Specification: Dimension: 37mm x 33mm Weight: 113g (132g with all fittings, connectors & prop driver) Kv: 1000rpm/V Voltage: 11.1V (3S) Max Power: 580W Max Current: 52A No load Current: 1.6A Diameter of shaft: 4mm Thrust: 1700g ESC: 60A |
||
|---|---|---|
|
Kód zb.: GU953-cx Cena: 996.00 ,- CZK |
|
Turnigy G15 Brushless Outrunner 810kvDesigned to be a direct swap out for your 15 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 15 size glow engine. Specification: Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V RPM: 810kv Max current: 42A No load current: 11V / 1.5A Internal resistance: 0.03 ohm Weight: 152g (not including connectors) Diameter of shaft: 5mm Dimensions: 73x35mm Test Data: 1 |
||
|---|---|---|
|
Kód zb.: EQ044-jl Cena: 442.00 ,- CZK |
|
Turnigy L3010C-1300kv (420w)Turnigy L3010C-1300kv (420w) Specification: Dimension: 37mm x 18mm Weight: 87g Kv: 1300rpm/V Voltage: 11.1v (3s) Max Power: 420w Max Current: 40.1A No load Current: 1.8A Diameter of shaft: 4mm Thrust: 1650g ESC: 50A~60A |
||
|---|---|---|
|
Kód zb.: UP736-20 Cena: 820.00 ,- CZK |
|
Turnigy D3536/6 1250KV Brushless Outrunner MotorTurnigy D3536/6 1250KV Brushless Outrunner Motor Specification: Battery: 2~4 Cell /7.4~14.8V RPM: 1250kv Max current: 34A No load current: 3A Max power: 500W Internal resistance: 0.034 ohm Weight: 102g (including connectors) Diameter of shaft: 5mm Dimensions: 35x36m Prop size: 7.4V/10x5 14.8V/9x4.7 Max thrust: 1270g |
||
|---|---|---|
|
Kód zb.: VK946-jh Cena: 765.00 ,- CZK |
|
NTM Prop Drive Series 35-36B 1400Kv / 495WNTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from |
||
|---|---|---|
|
Kód zb.: PT087-41 Cena: 769.00 ,- CZK |
|
Turnigy L3010B-1300 Brushless Motor (420w)Turnigy L3010B-1300 Brushless Motor (420w) Specification: Dimension: 37mm x 27mm Weight: 88g (108g with all fittings, connectors & prop driver) Kv: 1300rpm/V Voltage: 11.1v (3s) Max Power: 420w Max Current: 40.1A No load Current: 1.8A Diameter of shaft: 4mm Thrust: 1650g ESC: 50A~60A |
||
|---|---|---|
|
Kód zb.: CI258-ii Cena: 986.00 ,- CZK |
|
Turnigy G10 Brushless Outrunner 1200kvDesigned to be a direct swap out for Park .10 size motors. This brushless outrunner will provide more power and longer run times with its high efficiency. A quality motor, built specifically for planes designed to fly with .10 glow engines. Specification: Battery: 2 ~ 4 Cell / 7.4V ~ 14.8V RPM: 1200kv Max current: 52A Watts: 375w No load current: 11.1V / 2.2A Internal resistance: 0.02 ohm Weight: 140g Diameter of shaft: 5mm Dimensions: 35x51mm Test Data: 11.1V - 11X5.5 Prop - 5 |
||
|---|---|---|
|
Kód zb.: GY834-16 Cena: 916.00 ,- CZK |
|
Turnigy L3020B-600 Brushless Motor (800w)Turnigy L3020B-600 Brushless Motor (800w) Specification: Dimension: 37mm x 38mm Weight: 146g (174g with all fittings, connectors & prop driver) Kv: 600rpm/V Voltage: 14.8v (4s) Max Power: 800w Max Current: 54A No load Current: 0.6A Diameter of shaft: 5mm Thrust: 1520g ESC: 80A |
||
|---|---|---|
|
Kód zb.: NW784-3s Cena: 961.00 ,- CZK |
|
Turnigy D3548/6 790KV Brushless Outrunner MotorTurnigy D3548/6 790KV Brushless Outrunner Motor Specification: Battery: 3~5 Cell /11.1~18.5V RPM: 790kv Max current: 40A No load current: 1.8A Max power: 715W Internal resistance: 0.040 ohm Weight: 159g (including connectors) Diameter of shaft: 5mm Dimensions: 35x48m Prop size: 11.1V/12x12 18.5V/11x7 Max thrust: 1650g |
||
|---|---|---|
|
Kód zb.: YD097-t6 Cena: 1263.00 ,- CZK |
|
Turnigy Aerodrive SK3 - 3548-700kv Brushless Outrunner MotorTurnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sint |
||
|---|---|---|
|
Kód zb.: CG630-fs Cena: 13790.00 ,- CZK |
|
Scorpion HK-5035-500 Brushless Outrunner MotorGreat upgrade motor for 450 class Helicopters suchs as the HK-450. Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, lo |
||
|---|---|---|
If you have any comments or questions about this site, please direct them to the Webmaster
Datum aktualizace 14.02.2015 ver. 2.00.571 info@modelmania.cz
Vaše IP adresa je: 13.58.201.235
.jpg)
