|
|
|
Turnigy 600 H37403 Brushless Outrunner 1180kv
A great motor for 550~600 class helicopters such as the Align T-Rex 550 and HK600
Specification:
Model: 3740
Turns:3
Cells: 11s
Kv: 1180rpm/V
No load Current: 3.4A/10v
Max power: 3kw
Weight: 379g
Shaft diameter: 6mm
Dimensions: 44.1 x 65mm
Recomended ESC: 100A HV
|
|
|
|
|
This motor is specifically designed for the 500 helicopter range and a perfect fit for any of our HK500 helicopters.
Specification:
Model: 3126
Turns: 5
Cells: 2~6S
Kv: 1300rpm/V
No load Current: 3A/10V
Max power: 1500W
Weight: 186g
Shaft diameter: 5mm
Dimensions: 37.2 x 47.5mm
Recomended ESC: 2~6S/70A
|
|
|
|
|
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 18A
Peak Current: 18A
Suggested prop: 10 x 6.0 E-prop
Suggested Battery: 1700mAh ~ 2200mAh 3S1P
Weight: 71g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors,
prop saver, mount, spare rubber rings, shrink tube and screws.
|
|
|
|
|
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells.
Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz.
Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
|
|
|
|
|
Combined with a 10x6 E-prop this motor can push out over 1000g in thrust on a 3S1P
configuration lipo.Good for bigger foamies or parkflyers where about 150W is required.
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 16A
Peak Current: 19A
Weight: 56g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount,
spare rubbe
|
|
|
|
|
Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 24x12/26x12" Propeller and a 180Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
|
|
|
|
|
Turnigy 2810 EDF Outrunner 4600kv for 55/64mm
Specification:
Kv- 4300
Dimensions: 46 x 28mm
Shaft: 2.3/3.0mm
Voltage: 11.1V
Weight: 59g
No-load current: 2.5A
No-load RPM: 51280
Load current: 29.3A
Load RPM: 37740
Thrust: 580g
Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5
Includes 2 shafts, 2.3 & 3.0mm
|
|
|
|
|
The Turnigy Typhoon is a very serious upgrade for any 600 size heli. Big, tight copper wire turns with thin, tightly packed laminations and a small stator/magnet air gap make this motor very efficient and powerful.
Users will notice the instant power increase and higher idle speed when using this motor & we suggest you adjust your throttle accordingly.
Specification:
Dimension: 42mm x 62mm, 85mm
|
|
|
|
|
Dimension: 32mm x 28mm, 48mm (with shaft)
Weight: 54g (kv800) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 15.4mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance
Voltage: 2 - 3S
Max current: 7 ~ 14A/20S
Prop: 8x4 ~ 10x4.7
Thrust: 540 ~ 800g
Power: 160W
For 500~800g model airplane.
|
|
|
|
|
XK2845-B-2000 ot/V - střídavý motor s vnitřní rotací
Specifikace:
Počet pólů: 4
Max.proud: 25 A
Max. napětí: 11.1 V
Otáček na Volt:2000 ot/V
Vnitřní odpor: 0.0490 Ohm
Odběr naprázdno: 0.8A (při napětí 7.4 V)
Rozměry: 28.0 x 48.0mm
Hloubka montážních otvorů: 5mm
Montážní rozteč otvorů: 19mm x 16mm
Délka hřídele (mimo tělo motoru): 12mm
Průměr hřídele: 4mm
Hmotnost: 120g
|
|
|
|
|
Designed to be a direct swap out for your .40 to .46 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine.
Specification:
Battery: 4~5 Cell /14.4~18.5V
RPM: 420kv
Max current: 55A
No load current: 11V/1.5A
Internal resistance: 0.032 ohm
Weight: 3
|
|
|
|
|
Turnigy D3536/5 1450KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1450kv
Max current: 45A
No load current: 3.5A
Max power: 655W
Internal resistance: 0.023 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/9x6 14.8V/8x4
Max thrust: 1380g
|
|
|
|
|
Turnigy D3536/8 1000KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1000kv
Max current: 30A
No load current: 1.7A
Max power: 430W
Internal resistance: 0.052 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/11x5 14.8V/10x6
Max thrust: 1160g
|
|
|
|
|
Turnigy D3548/6 790KV Brushless Outrunner Motor
Specification:
Battery: 3~5 Cell /11.1~18.5V
RPM: 790kv
Max current: 40A
No load current: 1.8A
Max power: 715W
Internal resistance: 0.040 ohm
Weight: 159g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x48m
Prop size: 11.1V/12x12 18.5V/11x7
Max thrust: 1650g
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|