Kód
|
Náhled
|
Název
|
Množství na skladě
|
Cena
|
|
|
|
|
|
ZM956-fz |
|
V kombinaci s 10x4 nebo 10x6 E-prop tento motor může tlačit nad 900g tah na 3S1P konfiguraci lipo. Dobré pro větší foamies nebo parkflyer to, |
Na cestě 4 - 6 ks
|
621.00,- CZK |
NJ373-gl |
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC |
Na cestě 3 - 9 ks
|
680.00,- CZK |
SA022-6z |
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC |
Na cestě 2 - 4 ks
|
680.00,- CZK |
RK641-xe |
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 6
Cells: 2~4S
Kv: 2900rpm/V
No |
Na cestě 4 - 6 ks
|
728.00,- CZK |
ZF829-g8 |
|
Turnigy D2836/11 750KV Brushless Outrunner Motor
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: |
Na cestě 2 - 3 ks
|
588.00,- CZK |
KL698-1s |
|
Turnigy L2206A-1650 Brushless Motor (130w)
Specification:
Dimension: 28mm x 21mm
Weight: 37g (50g with all fittings, connectors & prop driver)
Kv: 1650rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 130w
Max Current: 17.8A
No load |
Na cestě 2 - 9 ks
|
572.00,- CZK |
SK168-zr |
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A |
Na cestě 4 - 6 ks
|
936.00,- CZK |
KD008-nz |
|
Specification:
Dimension: 28mm x 38mm, 53mm(with shaft)
Weight: 72g (kv3200) (not including connectors)
Diameter of shaft: 3.17mm
Length of front shaft: 14mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 3-5S
Prop: 70mm |
Na cestě 3 - 5 ks
|
884.00,- CZK |
AW427-pn |
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC |
Na cestě 3 - 6 ks
|
680.00,- CZK |
FU772-wo |
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC |
Na cestě 4 - 6 ks
|
716.00,- CZK |
GU060-cj |
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC |
Na cestě 4 - 6 ks
|
692.00,- CZK |
BQ953-a9 |
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC |
Na cestě 4 - 9 ks
|
494.00,- CZK |
HQ182-53 |
|
Designed to be a direct swap out for Park 450 size motors.
This brushless outrunner will provide more power and longer run times with its high |
Na cestě 4 ks
|
497.00,- CZK |
MB039-qv |
|
Corona CS-239MG Slim-Wing Analog Servo 4.6kg/22g / 0.14sec
Specification:
Model: CS-239MG
Operating Voltage: 4.8V / 6.0V
Operating Current: 300mA / 400mA
Operating Speed: 0.15sec.60º/ 0.14sec.60º
Stall Torque: 4kg.cm /4.6kg.cm
Size: 30 x |
Na cestě 3 - 5 ks
|
318.00,- CZK |
TN789-yc |
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 5
Cells: 2~4S
Kv: 2500rpm/V
No |
Na cestě 4 - 6 ks
|
621.00,- CZK |
|
|