|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 50 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2200kv
Max current: 7A
No load current: 7.4V/0.45A
Current capacity: 8A/15sec
Internal resistance: 0.25 ohm
Weight: 14g (not including connectors)
Diameter of shaft: 2mm
Dimensions:
|
|
|
|
|
Dimension: 21.4mm x 17.6mm, 30mm (with shaft)
Weight: 11g (kv2000) (not including connectors)
Diameter of shaft: F1.9mm
Length of front shaft: F8.1mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Max performance:
Voltage: 2S
Max current: 3.2 ~ 4.1A/20S
Prop: 6x3 ~ 7x3.5
Pull: 150 ~ 165g
For 150g indoor flyer.
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1600kv
Max current: 9A
No load current: 11V/0.5A
Internal resistance: 0.18 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
Specification:
Dimension: 23mm x 18mm, 31mm(with shaft)
Weight: 12g (kv2900) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8mm
Lamination thickness: .2mm
Magnet type: 45SH
Voltage: 7.4V
Amp: 5.8A
Thrust: 165g
Propeller: 6030
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2050kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.23 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Specification:
RPM/V: 1350Kv
Cell Count: 2s~3s Lipoly
Max.current: 10A
Max Watts: 120w
No Load Current: 0.3A/7.4V
Dimensions: Φ28mm×16mm
Shaft: 3mm
Weight: 26g
Max Thrust: 245g
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|
|
C1818 Micro brushless Outrunner 3500kv (9g)
Specification:
Diameter: 18mm
Length: 19mm
Shaft: 4mm
Weight: 9g (with 10cm wire)
Power: 40W
Turns: 25
Resistance: 493
Idle Current: 0.3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 1680kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.32 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!
Features
Light weight design.
Strong and light
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 1800kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv1800) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8.3mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
Suitable for LAMA2 and similar micro helicopters.
Specification:
Weight: 2.6g
Kv: 6100rpm/v
Size: 17 x 13mm
Max current: 2A
Current: 4.2V/0.4A (No load)
Shaft: 1mm
Shaft length: 5mm
Prop: 2510
Test data:
GWS 2510
Voltage: 4.2V
Current: 2.40A
Watts: 10.08W
Thrust: 32g
Efficiency (g/w): 3.17
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from
|
|
|
|
|
Turnigy 2730 Brushless Motor 1500kv
Specification:
Dimension: 32mm x 27mm, 43mm(with shaft)
Weight: 26g (kv1500) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 10mm
Lamination thickness: 0.2mm
Magnet type: 45SH
Thrust: 290~410g
Prop: 7x3.5 or smaller
ESC: 10A
Max Current: 4.5~8A
Lipo Cells: 2-3S
|
|
|
|