položek: 232 Seřadit: Dle názvu A→Z| Od nejlevnějšího| Dle kódu 0→9| Od nejnovějšího
Turnigy G46 Brushless Outrunner 550kv (.46 Glow)
Novinka!
Kód zb.: GH412-s4
Cena: 1622.00 ,- CZK
Počet: ks
Na cestě 4 ks

Turnigy G46 Brushless Outrunner 550kv (.46 Glow)

Designed to be a direct swap out for your .40 to .46 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a .40 ~ .46 glow engine. Specification: Battery: 4~5 Cell /14.4~18.5V RPM: 550kv Max current: 55A No load current: 11V/1.9A Internal resistance: 0.021 ohm Weight: 3

Turnigy Aerodrive SK3 - 3536-1200kv Brushless Outrunner Motor
Novinka!
Kód zb.: KC961-fi
Cena: 999.00 ,- CZK
Počet: ks
Na cestě 2 - 5 ks

Turnigy Aerodrive SK3 - 3536-1200kv Brushless Outrunner Motor

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sint

NX-4006-530kv Brushless QuadroCopter Motor
Novinka!
Kód zb.: XX648-5o
Cena: 892.00 ,- CZK
Počet: ks
Na cestě > 5 ks

NX-4006-530kv Brushless QuadroCopter Motor

Pokud se vážně zajímáte o výkon u vaší quadrikoptéry, nemusíte hledat nic jiného, než motory AX-4006. Tyto motory jsou osazeny velmi kvalitními 45SH magnety, s vysokým počtem polů, mají širokou možnost montáže a navíc-jsou to motory speciálně určené pro vícerotorové modely. Motory AX-4006 mají na ose nalisované osazení pro vrtule typu GWS a hliníkové montážní lože pro rychlou a snadnou montáž do rámu quadrikoptéry. Upozornění: Nejedná se o modifikované letecké motory. Jsou to motory navržené a sestrojené speciálně pro quadrikoptéry. Specifikace: Otáčky

reklamní sdělení
Turnigy 3639 Brushless Motor 750kv
Novinka!
Kód zb.: FX623-9w
Cena: 1014.00 ,- CZK
Počet: ks
Na cestě 3 - 4 ks

Turnigy 3639 Brushless Motor 750kv

Turnigy 3639 Brushless Motor 750kv Specification: Dimension: 37mm x 42mm, 62mm(with shaft) Weight: 136g (kv750) (not including connectors) Diameter of shaft: 5mm Length of front shaft: 18.8mm Lamination thickness: 0.2mm Magnet type: 45SH Max performance Voltage: 2-3S Max current: 30~35A Prop: 12x8~14x10 Thrust: 1800~2000g Power: 600W For 1500~2000g 3D model airplane.

Turnigy 450 H2218 Brushless outrunner 2500KV
Novinka!
Kód zb.: TN789-yc
Cena: 621.00 ,- CZK
Počet: ks
Na cestě 4 - 6 ks

Turnigy 450 H2218 Brushless outrunner 2500KV

This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters. Specification: Model: 2218 Turns: 5 Cells: 2~4S Kv: 2500rpm/V No load Current: 2.5A/10V Max power: 500W Weight: 67g Shaft diameter: 3.17mm Dimensions: 27.2 x 36.5mm Recomended ESC: 2~4S/50A

reklamní sdělení
Turnigy Multistar 4225-390Kv 16Pole Multi-Rotor Outrunner
Novinka!
Kód zb.: RB448-y0
Cena: 1253.00 ,- CZK
Počet: ks
Na cestě 3 - 7 ks

Turnigy Multistar 4225-390Kv 16Pole Multi-Rotor Outrunner

Looking for the ultimate power system for your next Multi-rotor project? Look no further! The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor u

NTM Prop Drive 28-36 2700KV / 595W
Novinka!
Kód zb.: UT737-1u
Cena: 692.00 ,- CZK
Počet: ks
Na cestě 2 - 8 ks

NTM Prop Drive 28-36 2700KV / 595W

NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de

Turnigy Aerodrive SK3 - 3542-800kv Brushless Outrunner Motor
Novinka!
Kód zb.: EW905-l7
Cena: 1126.00 ,- CZK
Počet: ks
Na cestě 4 - 8 ks

Turnigy Aerodrive SK3 - 3542-800kv Brushless Outrunner Motor

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sint

Turnigy D3536/6 1250KV Brushless Outrunner Motor
Novinka!
Kód zb.: UP736-20
Cena: 820.00 ,- CZK
Počet: ks
Na cestě 4 - 9 ks

Turnigy D3536/6 1250KV Brushless Outrunner Motor

Turnigy D3536/6 1250KV Brushless Outrunner Motor Specification: Battery: 2~4 Cell /7.4~14.8V RPM: 1250kv Max current: 34A No load current: 3A Max power: 500W Internal resistance: 0.034 ohm Weight: 102g (including connectors) Diameter of shaft: 5mm Dimensions: 35x36m Prop size: 7.4V/10x5 14.8V/9x4.7 Max thrust: 1270g

NTM Prop Drive Series 42-38 750kv / 785W
Novinka!
Kód zb.: HF625-4g
Cena: 1017.00 ,- CZK
Počet: ks
Na cestě 2 - 8 ks

NTM Prop Drive Series 42-38 750kv / 785W

NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ

Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
Novinka!
Kód zb.: MD016-y6
Cena: 1798.00 ,- CZK
Počet: ks
Na cestě 2 ks

Turnigy G60 Brushless Outrunner 500kv (.60 Glow)

Designed to be a direct swap out for your .60 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine. Specification: Battery: 5~7 Cell /18.5~25.9V RPM: 500kv Max current: 65A No load current: 11V/1.9A Current capacity: 65A/15sec Internal resistance

Turnigy G15 Brushless Outrunner 710kv
Novinka!
Kód zb.: SO204-er
Cena: 841.00 ,- CZK
Počet: ks
Na cestě 7 ks

Turnigy G15 Brushless Outrunner 710kv

Designed to be a direct swap out for your 15 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 15 size glow engine. Specification: Battery: 3~4 Cell /11.1~14.8V RPM: 710kv Max current: 42A No load current: 11V/1.5A Internal resistance: 0.034 ohm Weight: 170g (not including connectors) Diameter of shaft: 5mm Dimensions: 73x35 Test Data: 14.8v - 1

Turnigy Multistar 4822-570Kv 22Pole Multi-Rotor Outrunner
Novinka!
Kód zb.: XT731-14
Cena: 1360.00 ,- CZK
Počet: ks
Na cestě 2 - 4 ks

Turnigy Multistar 4822-570Kv 22Pole Multi-Rotor Outrunner

Looking for the ultimate power system for your next Multi-rotor project? Look no further! The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 22 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor us

NTM Prop Drive Series 35-30A 1400kv / 560W
Novinka!
Kód zb.: LG799-9a
Cena: 669.00 ,- CZK
Počet: ks
Na cestě 4 - 5 ks

NTM Prop Drive Series 35-30A 1400kv / 560W

NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from

NTM Prop Drive Series 35-36B 1400Kv / 495W
Novinka!
Kód zb.: VK946-jh
Cena: 765.00 ,- CZK
Počet: ks
Na cestě 4 - 7 ks

NTM Prop Drive Series 35-36B 1400Kv / 495W

NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from

reklamní sdělení

Výrobci

Návštěvy

Reklama

Možnosti plateb