|
|
|
Specification:
Kv: 860rpm/v
Operating Current: 6A ~ 17A
Peak Current: 19A
Weight: 72g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws.
Performance Data:
Voltage: 11.1V / 11.1V / 11.1V
Current: 12.3A / 16.3A / 17.9A
Prop: 1060 / 1070 / 1147
Thrust: 800g / 970g / 1040g
|
|
|
|
|
Turnigy D3536/9 910KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 910kv
Max current: 25.5A
No load current: 1.5A
Max power: 370W
Internal resistance: 0.063 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/12x5 14.8V/10x7
Max thrust: 1050g
|
|
|
|
|
Turnigy 2810 EDF Outrunner 4000kv for 55/64mm
Specification:
Kv- 4000
Dimensions: 46 x 28mm
Shaft: 2.3/3.0mm
Voltage: 11.1V
Weight: 59g
No-load current: 2.0A
No-load RPM: 44640
Load current: 22.6A
Load RPM: 35220
Thrust: 550g
Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5
Includes 2 shafts, 2.3 & 3.0mm
|
|
|
|
|
XK2845-B-2000 ot/V - střídavý motor s vnitřní rotací
Specifikace:
Počet pólů: 4
Max.proud: 25 A
Max. napětí: 11.1 V
Otáček na Volt:2000 ot/V
Vnitřní odpor: 0.0490 Ohm
Odběr naprázdno: 0.8A (při napětí 7.4 V)
Rozměry: 28.0 x 48.0mm
Hloubka montážních otvorů: 5mm
Montážní rozteč otvorů: 19mm x 16mm
Délka hřídele (mimo tělo motoru): 12mm
Průměr hřídele: 4mm
Hmotnost: 120g
|
|
|
|
|
Turnigy Typhoon 2218H Brushless 450-Size Heli Motor 3450kv
Specification:
Dimension: 37mm x 28mm, 54mm(with shaft)
Weight: 71g (kv3450) (not including connectors)
Voltage: 2-4S
Diameter of shaft: 3.17mm
Length of front shaft: 16mm
ESC: 40A
Turnigy Typhoon 2218H for 450 class Helicopters.
|
|
|
|
|
Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 10s Lipoly battery, 24x12/26x12" Propeller and a 180Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.
|
|
|
|
|
Designed to be a direct swap out for your 1.10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 1.10 size glow engine.
Specification:
Battery: 8~9S Cell /29.6~33.3V
RPM: 295kv
Max current: 55A
No load current: 10V/1.2A
Current capacity: 65A/15sec
Internal resistan
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 4
Cells: 2~4S
Kv: 3200rpm/V
No load Current: 3.6A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Turnigy L3010C-1300kv (420w)
Specification:
Dimension: 37mm x 18mm
Weight: 87g
Kv: 1300rpm/V
Voltage: 11.1v (3s)
Max Power: 420w
Max Current: 40.1A
No load Current: 1.8A
Diameter of shaft: 4mm
Thrust: 1650g
ESC: 50A~60A
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 500kv
Max current: 65A
No load current: 11V/1.9A
Current capacity: 65A/15sec
Internal resistance
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 50 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2200kv
Max current: 7A
No load current: 7.4V/0.45A
Current capacity: 8A/15sec
Internal resistance: 0.25 ohm
Weight: 14g (not including connectors)
Diameter of shaft: 2mm
Dimensions:
|
|
|
|
|
Turnigy LD3727A-1300 Brushless Motor
Specification:
Dimension: 37mm x 27mm
Weight: 86g Inc 4mm Gold Connector (105g inc all fittings)
Kv: 1300rpm/V
Voltage: 11.1v (3s)
Max Power: 450w
Max Current: 42A
No load Current: 2A
Diameter of shaft: 4mm
Thrust: 1150g
ESC: 60A
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 850kv
Max current: 28A
No load current: 11V/0.9A
Internal resistance: 0.09 ohm
Weight: 80g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 34.7x36.9mm
Required
|
|
|
|
|
Turnigy L2815H-3450 Brushless Heli Motor (400w) 450 size Heli
Specification:
RPM/V: 3450 KV
Voltage: 11.1v(3s)
No load Current: 2.6A
Max Current: 42A
Max Power: 430W
Shaft Size : 3.175mm
Shaft Length: 18mm
Dimension: 28mm x 36mm
Thrust: 600g
Weight: 66g
|
|
|
|
|
Turnigy L2815-2700 Brushless Heli Motor (400w) 4S/450 size Heli
Specification:
RPM/V: 2700 KV
Voltage: 14.8v(4s)
No load Current: 1.5A
Max Current: 35A
Max Power: 400W
Shaft Size : 3.175mm
Shaft Length: 18mm
Dimension: 28mm x 36mm
Thrust: 690g
Weight: 66g
|
|
|
|